How to clean resin from fabric. How to remove tar from clothes at home

The resin of coniferous trees or of artificial origin cannot be removed with water or wiped off. When heated, the substance becomes sticky and spreads over the tissue. Freezing it will greatly facilitate the removal of the resin stain. Low temperature will make the resin hard and brittle. The soiled item must be placed in the freezer for approximately 1.5-2 hours. A lump of frozen substance is easily removed from the product. If the stain was smeared on the surface in a thin layer, lightly rub the fabric. The procedure is recommended to be performed with rag gloves to avoid the resin sticking to the fingers. The stain will crack and fall off. After freezing, small compact contamination can be removed without a trace. However, in most cases, after such cleaning, a stain remains.

If the freezer is not available, you can remove the top layers of dirt with a dull knife or spoon. Care must be taken not to increase the area of the stain, rub the resin into the fabric and not damage the clothing.

Pre-cleaning will get rid of most of the dirt without much effort and damage to the fabric. However, this method is not suitable for very thin and delicate things. Mechanical destruction of a hardened resin stain can disrupt the structure of a fragile tissue.

To remove residual contamination, you will need to use other methods. Organic solvents can cope with such pollution, under the influence of which the resin dissolves or swells.

Fabric preparation before processing

Clothing must be cleaned before applying stain removers. The presence of other contaminants can lead to the formation of streaks after fabric treatment with preparations. It is best to clean the contaminated area with a regular dry clothes brush.

Before the procedure, the place where the stain is located must be fixed on a hard surface. It is advisable to enclose a plank wrapped in several layers of white cotton fabric.

If the soiled clothing has a lining, it must be torn up, and the plank should be fixed between the fabric and the lining material.

It is recommended to moisten the cloth around the stain with water. From above it can be sprinkled with talc or starch. This zone will serve as a kind of barrier for resin and stain removers. It will protect clean areas from contamination during the procedure.

Ways to remove fresh stains

A fresh stain is quite easy to eliminate with gasoline. But you need to use only a purified product that is sold in the store. Trying to remove resin from clothes with automotive fuel can completely ruin the thing.

If there is any doubt that the fabric will withstand cleaning with gasoline without loss, it is better to use a more gentle agent. White baby soap is diluted in gasoline in a ratio of 1: 1 and the composition is applied to the stain. After an hour, the fabric must be rinsed in cool water. Refined kerosene can be used instead of gasoline.

Many successfully remove fresh tar stains with acetone. The usual nail polish remover that every woman has will do.

Alcohol is a proven remedy for tar stains. Vodka will remove small stains. For large stains, it is better to use rubbing alcohol. A piece of rags or a cotton swab is moistened with alcohol and the stain is treated with it until it disappears completely. It will take patience to remove alcohol contamination. The procedure will take at least half an hour. So much time is needed for the impregnation of the fibers of the fabric and the destruction of the resin residues.

Turpentine will help enhance the effect of alcohol. They are abundantly moistened with a stain and left for 20-30 minutes to act on the resin. During the chemical reaction, the pollution softens. In this form, the substance is easily removed with a cotton swab dipped in alcohol. The disadvantage of turpentine treatment is its strong unpleasant odor. After removing the stain, the clothes should be washed in powder and hung to dry outdoors.

If none of the listed substances was at hand, you can try to remove the stain with dishwashing detergent. The soiled area must first be treated with vegetable oil and after 20-30 minutes, apply dishwashing detergent to it.

Tar stains can be removed by soaking clothes for several hours in carbonated drinks - Coca-Cola, Pepsi or lemonade.

Ordinary milk can clean resin from clothes. Soak the stained area in it for at least one hour and rinse the product in cool water. How to remove a stain without using stain removers?

Iron removal

Getting rid of tar with an iron is the easiest and safest way. It is successfully used to remove fresh and small contaminants. Paper towels are placed under the soiled area and on it (paper towels or cotton rags are also suitable). With a hot iron, the contaminated place is ironed. Under the influence of high temperature, the resin melts and is absorbed into the napkins. The procedure should be repeated until the complete disappearance of contamination, constantly changing the absorbent material.

If the contaminated area is pre-treated with turpentine, then getting rid of the stain will be faster.

The product can be soaked in a mixture of alcohol and turpentine, taken in equal parts. The treated fabric is ironed through a napkin with a hot iron several times, changing absorbent napkins.

How to get rid of old pollution

Old resin stains are more difficult to remove. They should be lubricated with fat (sunflower oil, lard, butter or petroleum jelly) before processing and left for impregnation for 3-4 hours. Try to carefully remove the top layer of contamination with a knife, and treat the remains with turpentine. After the procedure, the turpentine remaining on the tissue must be washed off with water. You can blot the treated area with a sponge soaked in water. If this is not done, a stain from turpentine will remain. It is better not to use turpentine on light fabrics.

You can remove the resin with a mixture of white clay, potato starch, turpentine and ammonia.

White clay and potato starch should be taken in equal parts. The composition is diluted with turpentine to a mushy state and a few drops of ammonia are added to it. The prepared product is rubbed into the stain and remains on the fabric until it dries completely. The dry agent is cleaned off with a stiff clothes brush. From the first time, the pollution may not disappear completely. Then the procedure should be repeated. The yellowish stain remaining after the removal of the resin is removed with a bleaching agent. This method is suitable for white cotton fabrics.

Effectively eliminates tar stains a mixture of 1 tbsp. l. potato starch, a few drops of ammonia and turpentine. The composition is treated with pollution and left on the fabric until completely dry. With a brush with stiff bristles, the stained area is cleaned of the product. Together with the stain remover, the dirt is also cleaned off.

Old stains after pre-treatment with fat are slightly heated and carbon tetrachloride or chloroform is applied to them (in the form of a paste). After that, the area to be cleaned is wiped with soapy alcohol and rinsed in warm soapy water.

English liquid can be prepared to clean the fabric. 15 g of gasoline and 100 g of wine alcohol (95 °) are poured into a glass. The liquids are thoroughly mixed and 35 g of ammonia (specific gravity 0.875) are added to them.

For synthetic products, it is better to use white spirit. It is a strong gasoline solvent. It can be purchased at the store. The preparation is treated with pollution using a cotton swab. When the stain dissolves, the product is washed in powder.

Industrial stain removers and bleaches will help remove stubborn stains. How to remove resin from valuable materials?

Tidying up delicate fabrics

Pine resin can be removed from wool or fur with vegetable oil and dishwashing liquid. First, the stain is treated with vegetable oil, then it is carefully cleaned with a soft cloth dipped in dishwashing detergent. Better to use Fairy.

Medical alcohol removes contamination from fur products. This method is best used for things made of valuable fur.

From dark woolen things, pollution can be removed with a cotton swab dipped in turpentine. It is better to clean a white woolen product with soapy alcohol.

The resin on a product made of genuine leather should be generously lubricated with vegetable oil and left for 20-30 minutes. Treated dirt can be easily cleaned with hot soapy water.

Suede can be cleaned with rubbing alcohol. To remove stubborn resin from the villi, it is recommended to use a metal brush with short wires.

Natural silk, velvet, velor and acetate are best cleaned with ether or alcohol. For delicate fabrics, you can use a mixture of 2 parts potato starch, 1 part turpentine and alcohol. The composition is applied to the stain for 12 hours. After that, the thing is thoroughly rinsed under running water and washed with powder.

Ether is preferable for removing stains from fabrics that cannot be washed. A cotton swab is moistened with ether and the contamination is treated. After the ether, medical alcohol is applied to the area to be cleaned. From the first time the stain usually does not disappear. Therefore, the procedure must be repeated several times. Always use a clean sponge or cotton swab when applying ether. How to clean clothes properly?

It is better to start breeding with less aggressive means. If gentle drugs do not cope with the task, then you can switch to the use of more powerful formulations. After each treatment, the product must be thoroughly rinsed.

No need to try to force stain removers into the dirt. The treatment of the stained area should be delicate.

Applying the product from the edges to the center will prevent the appearance of streaks after the procedure. If the spot is very small, it is better to use a pipette or a cotton swab to apply the stain remover.

Precautionary measures

Tar stain removers are aggressive and can be harmful to health. It is strongly not recommended to wash soiled items in organic solvents. Vapors of substances are toxic and flammable. The agent must be applied directly to the contamination in a minimum amount.

At home, the procedure should be carried out with rubber gloves and in a well-ventilated area. It is necessary to open windows or turn off the hood. There should be no sources of fire in the room.

Things treated with drugs should be kept out of the reach of children.

Before using tar stain removers, their effect on the fabric should be checked on an inconspicuous area of the product. This measure is especially relevant for dyed and delicate fabrics. It is advisable to apply the product from the wrong side of the garment.

When choosing a stain remover, you must consider the type of fabric. Acetone should not be used to remove stains from acetate silk. Alcohol can ruin the color of colored fabrics. Petrol is not recommended for cleaning synthetic materials. Bleaches are not used for dyed fabrics.

The listed means can clean clothes from resin of any origin.

Removing tar from clothes is not an easy task. Due to the complex composition, the resin penetrates deep into the fabric and hardens in its fibers. And if the crust from the surface of the material can be removed mechanically, then it will be more difficult to remove the remaining greasy stain.

It is necessary to remove the resin stain in several stages.

In this article, we have prepared for you an overview of effective ways to deal with resin stains from spruce, pine and other trees. Read also how to deal with traces of tar and other types of resin.

First step

Before you wash the resin at home, the thing needs to be prepared.

First, get rid of the resin crust mechanically. Using a sharp object such as a knife, carefully scrape off the resin.

Then, to make it easier for you to remove small particles, put the item in the freezer for several hours. Once the resin has set, remember the fabric and scrape off the remaining substance.

After freezing, the resin becomes brittle - it is enough to rub the stain with a brush, and the remains of the resin crust will easily fall off.

If you are dealing with a delicate and thin fabric, it is better to refuse to freeze things. In all other cases, this step is required.

Before you start removing a tar stain, here are some helpful tips:

To prevent the stain from spreading onto the fabric, moisten the area around the stain with water and sprinkle with talc or starch. This will allow the stain not to smear and remain within its boundaries;
the resin is always removed from the wrong side of the product. On the front side, a plain napkin (made of fabric or paper) is placed;
to remove the resin from a small area, use a pipette or a cotton swab to apply the product;
it will be easier to remove the resin if you clean the stain from the edges to the center.

improvised means

So, how can you remove resin? If the store stain remover failed, improvised means come to the rescue, which are in almost every home.

Alcohol

A common way to remove tar from clothing is to use rubbing alcohol.

Dip a piece of cotton or cloth in alcohol and rub the stain thoroughly. This process may take 20-30 minutes. Then wash the item in the usual way. For light soiling, you can simply pour alcohol on the stain and leave to act.

This method can be used to remove resin from jeans, pants, jackets or other thick clothing. Please note that alcohol can corrode some dyes, so test it on an inconspicuous area before starting the procedure. Alcohol is not recommended for fine fabrics.

Using alcohol is a common way to remove tar stains from clothing.

Iron

An iron will help remove the resin from clothes. Way to go for delicate fabrics(chiffon, silk).

Lay some fabric napkins (not colored) on the stain from the wrong side and right side and iron several times. From the high temperature, the resin will begin to melt and gradually seep onto the napkins. Change the towels several times, continuing to run the iron over the stain until it is completely gone. After the procedure, wash the item as usual.

This method is suitable for colored fabrics, because, unlike alcohol or thinner, exposure to high temperature will not damage the color of the product.

Instead of cloth napkins, you can use soft paper towels.

The iron will help to cope with stains from wood and epoxy resins.

Solvents

Solvents are often used to remove tar from clothing. You can also use refined gasoline (for lighters), acetone, or nail polish remover.

Acetone and white spirit (white spirit) are suitable for removing stains from plain clothes. White spirit will cope with tar, wood and epoxy resin. Do not use acetone on acetate silk.

For colored things nail polish remover is better - it is less aggressive for fibers. Gasoline also has a more gentle effect on the fabric.

Synthetic resin stains will help remove toluene and toluene-based solvents.

Before using one of these products, test the tissue reaction on an inconspicuous area - if everything is in order, proceed to remove the resin. Gently blot the stain with a cotton swab (if the fabric allows, you can leave the solvent to work for about 15-20 minutes). Once the fabric has been soaked, remove any solvent and resin residue with a tissue and launder thoroughly with conditioner.

Use solvent carefully to remove tar stains from colored fabrics. Be sure to test the fabric reaction on an inconspicuous area.

Do not use regular motor gasoline to remove resin from clothing - you risk damaging the fabric

Turpentine

Use not technical, but pharmacy turpentine to remove stains. Gently apply it on the stain and leave it on for 30-40 minutes. Then rinse the thing in a soda solution (1 tablespoon per 1 liter of water) and wash by adding 1 tablespoon to the powder or soap. l. soda. Soda is needed to get rid of the smell of turpentine.

You can use turpentine in combination with starch and ammonia. This method is suitable for delicate fabrics. Prepare a mixture of 1 tbsp. l. starch, 3-4 drops of ammonia and 3-4 drops of turpentine and apply on the stain. After the mixture dries, scrub the stain with a brush, rinse and wash the item as usual. If necessary, the procedure can be repeated.

Removing a tar stain is not difficult, but you can always ask a dry cleaner for help.

Dishwashing liquid

Dishwashing liquid dissolves grease and can easily deal with a small tar stain.

Rub the stain with dish soap, let it work for a while, rinse the item in water and launder in the usual way.

Dishwashing liquid combined with vegetable oil will help remove tar from fur, wool and carpets.

This method is especially good for woolen clothes. Pre-treat the stain with vegetable oil, then rub with dishwashing liquid and leave to act for a while. After rinse and wash the item as usual.

Lemon juice

Apply lemon juice to the stain, leave for 30-40 minutes. Then rinse and wash the item as usual. The procedure is harmless to tissues, and if necessary, it can be repeated several times.

Lemon juice will help get rid of tar stains. You can replace it with citric acid from a bag, after diluting it with water

Oil

Remove resin from leather products and things from leatherette and remove stains from fur or carpet you can use vegetable oil (sunflower or olive). Soak the stain with a cotton swab dipped in oil, leave for 20-30 minutes to act and wash the item with soapy water.

If you venture to use oil to remove tar from fabric items, remember that you will have to get rid of the grease stain. Wash the item with laundry soap or dishwashing detergent. If the fabric allows, you can use alcohol.

Vegetable oil will remove stains not only from wood resin, but also from tar

Butter will do a good job. Take a piece of oil and carefully treat the stain. Remove oil with alcohol or dishwashing liquid.

Carbonated drinks

You can remove pine resin (and not only) with the help of carbonated drinks: Coca-Cola, Fanta or Sprite. Apply soda to the stain or soak the item completely in the drink for several hours. After a while, rub the stain with a brush, and after the procedure, wash the item in the traditional way.

Do not use soda to remove stains from white items - they will turn yellow or gray

Boiling water

To remove resin from cotton fabric you can use boiling water. As soon as you take the thing out of the freezer, thoroughly pour boiling water over the stain and remove the remaining resin with a napkin. Then wash the item as usual.

Do not use boiling water for delicate fabrics and wool - this method is suitable for cotton materials

soda, starch

Sprinkle baking soda or starch on the stain and leave for 1 hour. Then rub the stain well with a brush or hands and wash the item as usual. Method fit for delicate fabrics.

Using baking soda or starch is suitable for delicate fabrics

Finally, here are some more helpful tips:

Be careful when using alcohols and acids to remove resin from brightly colored materials. Even coarse denim is best tested on the inside seams of the product;
do not remove stains with bleach. It will not only discolor, but also damage the fabric;
use lye and bleach only for white fabrics;
when removing resin stains, first use the mechanical method, then the thermal one, and only if these methods are ineffective, switch to acids and solvents.

Do you know that:

Stretch ceilings made of PVC film can withstand from 70 to 120 liters of water per 1 m 2 of its area (depending on the size of the ceiling, the degree of its tension and the quality of the film). So you can not be afraid of leaks from neighbors from above.

Fresh lemon is good for more than just tea: clean stains from the surface of an acrylic bath by rubbing with a half of cut citrus, or quickly clean the microwave by placing a container of water and lemon slices in it for 8-10 minutes at maximum power. The softened dirt will simply be wiped off with a sponge.

In the dishwasher, not only plates and cups are washed well. It can be loaded with plastic toys, glass shades of lamps and even dirty vegetables, such as potatoes, but only without the use of detergents.

Before removing various stains from clothes, you need to find out how safe the chosen solvent is for the fabric itself. It is applied in a small amount to an inconspicuous area of \u200b\u200bthe thing from the wrong side for 5-10 minutes. If the material retains its structure and color, you can move on to stains.

The habit of using the washing machine “economically” can lead to the appearance of an unpleasant odor in it. Washing at temperatures below 60 ℃ and short rinses allow fungi and bacteria from dirty clothes to remain on internal surfaces and actively multiply.

The threads of gold and silver, with which clothes were embroidered in the old days, are called gimp. To obtain them, the metal wire was pulled for a long time with tongs to the state of the required fineness. This is where the expression “pull (raise) the gimp” came from - “engage in long monotonous work” or “delay the execution of the case”.

Alena 04/06/2018 09:25

At the mention of the word "resin", many people remember the black viscous liquid that used to be poured over gas pipes. But this term also means gum - a viscous substance that forms on the bark of fruit and coniferous trees.

Quite often, not only children climbing trees, but also adults can find such an unpleasant “surprise” on their clothes.

Resin is a complex substance, and it is not easy to clean it from clothes. Before you start washing, you should try to clean the resin mechanically: put the item in the freezer.

All resins harden under the influence of low temperatures, and in this form they can easily be simply scraped off with a blunt object. It is only necessary to do this carefully so that the resin does not eat deeper into the fabric.

Another important point: the edges of the stain can be moistened with water, which will not allow the resin to “spread” further on the fabric.

Removing pine (Christmas tree) tar stains from clothing

Many people associate coniferous trees with the New Year: a fragrance, a soothing color and ... unpleasant marks on the hands during the purchase of a New Year's beauty - a Christmas tree or pine. These traces are left by resins, which often cover the trunk of a tree.

From the hands, the astringent sticky substance gets on the clothes, and then the questions immediately appear in the head: “How to remove the resin” and “What means to use”. There are several proven ways to help clean pine resin stains at home.

Carbonated drinks. To remove tar stains from your favorite trousers or jacket, just soak them for 30 minutes in any carbonated drink. It is better that it be the popular Cola, Sprite or Fanta. After the specified time, the item must be washed in warm water.
Ethanol. A laborious but effective method using alcohol will remove fresh dirt. What do I need to do? Nothing special: moisten a piece of a clean cloth or napkin in alcohol and wipe the stained area with it. It will take a long time to rub, but it's worth it: traces of resin will disappear 100 percent.
Nail polish remover. The essence of the method is the same as in the previous paragraph. There is only one important point: if the fabric is bright, with a pattern, then it is better not to risk it. After all, the aggressive components that make up the liquid can not only destroy traces of resin, but also “wash off” the color or pattern.
Refined gasoline. Method of application: moisten a cotton swab or a clean rag in the oil product and rub the stained area with it (her) until the stain disappears. After that, wash the item in warm water with the addition of , rinse thoroughly and dry in the open air. The last condition must be met in order for the unpleasant aroma of gasoline to disappear faster and not bring discomfort to the wearer.
Turpentine. The sequence of actions is the same as in the method with gasoline. To destroy an unpleasant odor, you can use a fabric softener or fabric softener.
Detergent. An affordable and common way to remove stains of any complexity on carpets, furs and wool. How to use: rub the stain with sunflower or olive oil, then apply dishwashing detergent on it, then wash (or rinse) in warm water.

If all these methods were powerless, then synthetic stain removers can be used.

Information about temperature, exposure time and other nuances is indicated on the packaging. Also, in order to clean resin stains from clothes, use.

The essence of the method is as follows: put the soiled thing between two pieces of cloth (paper napkins) and hold it with a hot iron. Under the influence of high temperature, the resin will transfer to the fabric or paper, and the thing will remain clean. To get rid of the unpleasant odor, it is enough to wash the clothes.

Acids and alcohols can destroy some paints that are used in dyeing fabrics. In order not to suffer from such a nuisance, it is necessary, before proceeding to remove the resin stain, to try the product on a piece of cloth (inconspicuous).

Methods for removing tar (black tar) stains from clothing

Tar is a material widely used in construction. But not only builders, but also young researchers can get dirty with it. In such cases, it is better for mothers not to scold their babies, but immediately proceed to remove black spots.

This can be done in several ways.

Clay-starch gruel. Prepare the mixture according to this recipe: 1 tsp. white clay, 1 tsp starch, 1 tsp turpentine and a few drops of ammonia. All components must be thoroughly mixed, brought to the place of contamination, left on the fabric until completely dry. When a dry crust forms, you need to take a brush and clean the stain. If a yellow mark remains in its place, hydrogen peroxide can be used.
Vegetable oil. If the resin has already hardened on the fabric, then you need to gently remove it with a knife, and then use vegetable oil (sunflower, olive, burdock). You don’t have to do anything special: just apply oil to the stained area and rub a little. Under such influence, the resin will begin to melt and disappear. After the stain is completely gone from the clothes, you need to wash the item with a stain remover or dishwashing detergent.
Gasoline with starch. This method is not new at all and is familiar to people who face the problem of tar stains on clothes almost every day: aircraft builders, concrete pavers, etc. To clean the soiled places, you need to mix 3 tbsp. gasoline and 2 tbsp. starch, apply the resulting slurry to the fabric and wait for it to dry completely. After that, clean the stains with a brush and wash in warm water with the addition of detergent.

In order not to spoil the thing stained with resin, it must be washed in warm water.

Gently removes tar stains from clothes

If an unpleasant and ugly stain of resin has settled on a delicate delicate fabric, such as silk or wool, then you need to be especially careful when removing it. For such products, too, there are old folk and modern methods.

Medical alcohol. To remove a tar stain, you need to moisten a cotton pad or swab in ether and rub the place of contamination with it until it completely disappears. After that, wash the item in warm water.
Turpentine, ethyl alcohol, starch. Displace all these components in a ratio of 1:1:1 and apply to the soiled area, leave for 12-15 hours. After the specified time, gently collect the gruel and wash the clothes using an effective detergent.
Solvent. You can remove a resin stain from clothes made from delicate fabrics using a common solvent: solvent, white spirit, acetone. The method is nowhere simpler: moisten a clean rag or cotton pad in one of these substances and rub the stain with it until the traces of resin completely disappear. After that, wash things using washing powder, rinse thoroughly and dry in the open air. To get rid of an unpleasant odor, you need to add a flavored conditioner or a few drops of essential oil during rinsing.

When removing tar stains from clothes, it is important not to ignore even the most unusual recipes and remedies. Sometimes the most original and, at first glance, crazy recipe is able to remove dirt from the fabric very effectively.

If all the folk methods used did not help, then you need to use washing powders and stain removers.

They say that the wife's fur coat is the husband's face, but the husband's shirt can be called the wife's face. That is why women try to ensure that their man is always dressed to the nines. Unfortunately, anything can happen, then the hostess has to make some efforts to make her beloved's outfit perfectly clean. One of the most difficult tasks is to remove resin stains. However, after you read this text to the end, even it will become easy to do.

The first thing to do after you find a tar stain on your clothes is try to remove it mechanically as soon as possible(scratch with a knife or some other sharp object). Be careful, because one awkward movement and you risk damaging the fabric structure. After that, you should send the soiled clothes to the freezer for a couple of hours, during which time the resin will harden and, by rubbing it with your hands, you can easily remove the remaining resinous scales (however, this should not be done if the soiled fabric is too thin). After these manipulations, you need to proceed to the main stage.

Solvent

Take refined gasoline (can be found in the store), turpentine or, in extreme cases, nail polish remover. Soak the resin stain with the selected solvent several times and leave for 20-30 minutes. After the dirt softens, rub it with a cotton swab dipped in alcohol. After a few minutes, the stain will disappear, and you just have to wash the clothes thoroughly with the addition of powder and dry them in the fresh air.

Drink Coca-Cola

Do not be surprised, but the beloved "Cola" by many will not only clean the rust, but also remove the tar stain from the clothes. Soak the stained clothes in a drink for a while, and then wipe the stain with a cotton pad.

Dishwashing liquid

Treat the resin stain with vegetable oil, leave for a few minutes. Then soak a cotton swab in dishwashing detergent and rub it on the stained area. Then wash the clothes and dry in the usual way.

How to Remove Resin Stains from Delicate Fabrics

Place clean paper towels under and on top of the stain and iron the area with a hot iron. The resin will melt and soak into the paper, so be sure to change your tissues from time to time. After the stain has disappeared, the clothes should be washed and dried.

How to remove resin stains from leather

Soak the stained area with vegetable oil. After a quarter of an hour, wash everything off with soapy water.

How to get old tar stains out

Mix a teaspoon of potato starch, 4 drops of ammonia and the same amount of turpentine. Moisten the contaminated area with the prepared mixture and wait for it to dry. Then, armed with a hard brush, clean thoroughly. For best results, the procedure can be repeated several times.

Pine and spruce - coniferous trees, tend to produce resinous substances that appear when a branch is damaged, a crack in the bark, and even on young twigs and green cones during the growth period. The resin smells pleasant, it also has some medicinal properties, but if it gets on clothes or hands, it will not bring pleasure. Coniferous resin is very dense and sticky, it is not an easy task to clean it from the fabric.

So, if you still get such a nuisance as a tar stain on some thing, then be patient, you will need to not only remove the stain, but at the same time not discolor or damage the fabric of the clothes. Therefore, we will clean the resin in several stages, using various means.

If you notice that there are traces of resin on the clothes, you do not need to rub them right away, so you can drive the resin drops into the depth of the fabric. You can try to clean off fresh resin, just like chewing gum. Put the soiled thing in a plastic bag and place it in the freezer for several hours, so that it freezes. Frozen resin is removed by rubbing the fabric with movements, as in hand washing. But on delicate fabrics, after such actions, creases and unnecessary folds may remain.

Resin marks can be removed by heating with an iron, as is done when removing a stain from wax. To do this, clean, dry paper napkins are placed on both sides of the fabric, where wood resin was noted, and ironed with a hot iron. The resin will melt and remain on the napkin. In this way, dense natural fabrics can be processed.

On fabrics with a strong color, common solvents - acetone, kerosene, white spirit - can be used to remove resin stains. Using a highly absorbent cloth soaked in solvent, wipe the resin stains 2-3 times until completely removed.

An old stain can be removed with a gruel prepared from starch, turpentine and ammonia, 4-6 drops of each of the liquids per teaspoon of potato flour. The gruel is distributed over the surface of the stain and left to dry. Then brush it off with an old toothbrush. The procedure can be repeated 2-3 times.

On white fabrics, after the resin, yellowish spots remain. They can be treated with a swab dipped in hydrogen peroxide. Peroxide brightens all natural and some synthetic fabrics.

You can also use slaked soda. To do this, a few drops of vinegar or lemon juice are dripped onto a teaspoon of soda. Then a thick mixture is applied to the stain and allowed to dry. Then also brush off.

After any of the above methods, the item must be washed in the recommended way for this product with washing powder. Despite the significant resistance of resin stains, in most cases of using all the above-mentioned products, they recede.

Not sure how to deal with stains on your favorite dress? Have you already tried all kinds of methods, but all attempts are in vain? Try the best Pre-Wash stain remover to buy. It's Swiss quality for stubborn stains.