The winter season is probably the best time to get the socks out of the closet drawer, wash them and put them on your child to warm up. Now children's leggings are in vogue. At the same time, if you did not find them in stores, you can knit them with knitting needles.

This won't be that hard to do. A little bit of perseverance with patience, possession of needlework techniques - and the new thing is ready. We knit the product with knitting needles, as well as crochet. Those needlewomen who are just mastering this art should choose the simplest patterns. Let's take a look at them in this article.

Initially, measurements should be taken from children. You can knit leg warmers not only on two, but also on five ordinary knitting needles. It is not so easy to say which particular method of doing work is simpler for a not too experienced needlewoman.

In the case of two knitting needles, the fabric will need to be stitched. Another option will require the ability to correctly distribute the loops with knitting needles. Regardless of this, the following measurements are required:

- girth of the legs under the knees;

- girth of the leg;

- calf girth;

- distance from the knee to the middle part of the calf;

- the distance between the middle of the calf to the ankle;

- the length of the product itself.

It will also be possible to carry out knitting on knitting needles without a pattern. In the event that you have children's leggings with a seam, then a pattern must be made. Draw a small rectangle on a millimeter measure. The largest of its sides is equal to the length of the product.

The small one is identical to the girth of the calf. Position the figure vertically, so it will be easier for you to build. Divide the two small sides in half and unite their midpoints with a line. Mark the vertical, setting a distance from the top line from the knee to the middle of the calf to the very ankle.

Let's draw thin lines that will be parallel to the horizontal sides. After that, on the top line, we lay off the half-girths of the legs under the knee from the vertical in two directions, on the next up - the girth of the lower leg, on the bottom there should be the girth of the ankles. Unite the ends of the lines on all sides with small curves.

At the bottom, be sure to draw a lapel in the shape of a rectangle or an increasing trapezoid.

In the first situation, only the upper part of the shoe will be covered by the product, in the other, a limited instep area. Ask your children which option they like best. With these knitting needles you can create different knitted products.

The most common pattern when knitting leggings, which is available even for not the most experienced craftsman, is stocking knitting. Cast on 20 stitches, knit the first row, purl the next row. Count the number of loops for each centimeter horizontally, as well as the number of vertical rows. Determine exactly how many loops you need to dial. Counting vertically helps to calculate with high accuracy the order of decreasing or increasing the number of loops. Knitting will not be difficult for you.

Consider another knitting pattern for a product that is distinguished by its simplicity.

1. Try to initially make knitted leggings for a child with a seam with knitting needles. This is very simple, because you are making a canvas that will then need to be tied (sewn) together.
2. For this purpose, on knitting needles with a thickness of 4 mm, dial 50 loops.
3. Of these, 110 rows should be connected. They must all be completely identical. It is necessary to alternate a pair of facial turns with a pair of purl ones.
4. We close the loops on the last row and erase the left panel. This must be done so that the knitted children's leggings do not start to sit down over time.
5. At the final stage, the panel needs to be sewn together. It is best to do the work with contrasting threads, as well as embroider something along the seam. Some decorate this place with ribbons, bows. You can use matching threads - then the product will come out practical, but at the same time quite modest.

Now the children's leggings are completely ready to wear. In general, such knitted products are very unpretentious in creation. You can make them with the most ordinary knitting needles. We only knit as carefully as possible, because you do all this for children.

Watch the video of knitting leggings:

Knitted leggings have become an integral part of the wardrobe of modern fashionistas. This thing draws attention to cute female legs, and leggings are relevant not only in the cold season. Modern young girls wear them with great success even in summer.

So what is the difference between winter and summer models? Of course, in the yarn from which this thing is made. The main purpose of winter leggings is to create comfort and warmth. Therefore, for these warm models, it is best to choose yarn that contains natural sheep or any other wool. As for summer leggings, these light and weightless models are intended for decoration. Most often, they are loved by young ladies who strive to stand out from the general gray mass and demonstrate to everyone around them their peculiarity and sense of taste.

Dance

But there is another kind of leggings that some girls need every day. We are talking about special knitted leggings that are intended for dancing.

It is known that sports dancing is one of the favorite activities for a large number of young girls. Every person would like even clothes designed for training to have a special personality and make it possible to demonstrate their charm.

This is probably why, in recent years, the popularity of knitted leggings for dancing has increased especially strongly. But besides this, dancers attribute the increased demand for knitted leggings to the fact that they help to avoid stretch marks and many other troubles that can happen in any workout.

Consequently, no one will dare to doubt the importance and indispensability of this accessory. And finally, it remains to figure out how to knit leggings with knitting needles.

Hole knitting technology, for heel or heel

So what is the difference between ordinary leggings and those that are intended specifically for dancing? The creation process is the same and differs only in one thing: all dance leggings must have an open heel. This is necessary in order to be able to put them on directly on special shoes, as well as to keep them on the leg better.

Making a hole is easy.

After you knit five to seven centimeters of any model, pick up a hook. Cast on as many air loops on your hook as needed to close the length you need for the hole. That is, you will need to connect the received air loops in the next row in a circle with those loops of the previous row that will make up the circle of the intended hole.

That's the whole trick.

Materials:

To knit any leggings, you will need only one hundred and fifty grams of yarn if you plan to knit a one-color model. For a striped model, the remnants of yarn are perfect, which are sure to be found in the arsenal of every needlewoman. You also need knitting needles that match the selected threads.

Model No. 1. Striped leggings

These striped leggings are ideal for bright girls who always strive to be the first in everything. In order to complete this model, you only need an initial level of skill in owning knitting needles. Type forty-eight loops with stocking or circular knitting needles and knit with an elastic band 2 x 2 (alternate two loops of faces and two loops of purl) ten centimeters. After that, go to work with a pattern of the front surface. That is, absolutely all subsequent rows will be knitted with facial loops.

The alternation of stripes can be very diverse. In the variant proposed above, the stripes alternate every four rows. In order to determine the final length of the future product, it is necessary to periodically apply work to the leg in the process of knitting.

Because only in this way will you be able to correctly calculate the number of rows needed to complete the work. You will definitely not be able to miss the knitting needles when making this product. Because these wonderful and funny stripes will replace each other with incredible speed and you will not notice for yourself how the work has come to its logical conclusion.

Model number 2. In an elastic band

The length of this model is 40 cm.

The main pattern with which this product is created

Elastic band 3 x 2 (that is, alternate three face loops and two wrong loops).

Knitting density

Twenty-two loops and thirty circular rows will create a square measuring 10 x 10 centimeters.

Work description

Dial sixty loops free and without tightening and tie a straight fabric forty centimeters long with an elastic band. When you reach this length, close all the loops as they look.

It’s easy to understand how to work on leggings. And any craftswoman will be able to create this light and airy work of art in just two evenings. If you want to go even further, you can show your imagination and decorate your new thing with some decor items. Anything you can sew or glue will do. Such leggings will become a real designer thing that exists in a single copy. So get creative and don't be afraid to experiment.

Leggings knitted for every day

The task that was set was to knit spats from one skein of yarn, as the yarn seemed ideal for this project, but it was the last skein. The yarn was like this, soft to the touch and pleasant to work with. Composition: 75% acrylic and 25% wool, 170m in 100g. Needles 3.75 for ribbing and 4.0 for the main pattern.

Since there was not much yarn, and the leggings were ordered by my daughter, they are rather beautiful than warm, I chose a pattern with braids and lace, vertical orientation. Source: book "700 patterns with knitting needles", the scheme is shown below:

The next stage is the sample and its washing in order to avoid any surprises in the future:

In the process of knitting the sample, it turned out that in order to smooth out the difference in width between the elastic band and the main pattern and a more beautiful transition, it is better to cut one loop per pattern repeat: make 11 elastic loops out of 12. We erase, dry. This sample after washing did not change its size by a millimeter, a pleasant property.

Having measured the caviar under the knee and the dimensions of the sample, we calculate the number of rapports required for knitting the product. In this case, it turned out four rapports per gaiter (gaiter?).

We collect loops and knit the beginning of a hollow elastic band. This type of set gives a nice rounded edge and some tightness due to the presence of four rows of hollow ribbing, which is useful for the top of the gaiters.

Since we will knit both leggings (?) at once, using the Magic Loop method

we collect on knitting needles 3.75 first half of the loops (22 pieces), then, from the thread extended from the middle of the skein, all 44 loops to the second, and then another 22 loops from the first end. When finished, it looks like this:

We start knitting with an elastic band 1 * 1, after 8 rows it looks something like this:

Since I have a limited amount of yarn, and I want the ribbing up and down to be the same width, and at the same time I would not have to unravel and tie off the bottom in case of a shortage of yarn, I also would not like to have too much yarn left. To do this, I simply weighed the skein left after the top elastic was tied, so that later I would leave about the same amount of yarn. It turned out that I used 10 g of yarn for the elastic. If you have an unlimited amount of yarn, you can skip these manipulations.

After that, we move on to the main pattern and knitting needles No. 4, I remind you that out of 12 elastic loops we get 11 loops of the main pattern.

Somewhere at two-thirds of the height, we reduce the number of loops in the braids to narrow the structure down, and the number of rows between the crossing loops by two rows also decreases. This maneuver is performed at the moment of crossing the loops, so only the result is noticeable, and the place of decrease is hidden.

In the process of knitting, we control the amount of yarn, and after knitting four rows after the next crossing, I found that I had 12 g of yarn left. We pass to an elastic band 1 * 1 and knitting needles 3.75, adding one loop per rapport.

It remains to close the loops, close with a needle, a knitted seam so that the top and bottom edges are identical.

That's all, the leggings are ready, there are a few meters of yarn left.

Edges are perfect:

Please note that this article is the author's. Therefore, copying the materials of the article on other sites is prohibited. It is allowed to place a photo with a link to the material.

Gaiters are a trendy accessory that never goes out of style. They were relevant in the 80s, and in the 90s, and now. However, if athletes used to wear leggings, today they are used as part of the everyday look and are worn with stilettos. Leggings can be different: warm ones will help you keep warm during a winter walk, and openwork ones will decorate your legs.

Thanks to the photo instructions on how to knit leggings, even beginners can cope with the creation of this accessory, but first you need to get acquainted with the varieties of loops and patterns.

Using front and back loops, you can get a simple, but beautiful product. The front part of knitted fabrics is created by facial loops, the wrong side is purl. This method creates a knitted one-sided fabric.

When knitting exclusively front or back loops, we get a double-sided fabric. To create more complex options, you will have to explore other knitting methods.

What kind of gaiters are there?

This accessory can be created from threads of the same color, have stripes, various patterns and voluminous decorations such as braids or pompoms.

If you want to learn how to knit leggings with your own hands, start by creating simple patterns. Although the technique of creating braids and other voluminous patterns is not yet available to beginner knitters, they may well knit striped leggings - this model looks very stylish. As the final step, the resulting product is crocheted.

Do not use thin yarn for knitting, as it is difficult to work with such material. It is also not recommended to use thick threads - it will be difficult for you to wear the resulting accessory.

Usually 48 loops are cast on the knitting needles - this is enough if you are creating leg warmers of medium fullness. Measure your foot, and then the resulting accessory will fit perfectly.

How to take measurements?

Gaiters are knitted using 2 or 5 knitting needles. When working with two knitting needles, the resulting fabric is sewn together. Using 5 needles, you will knit in the round, paying attention to the correct distribution of loops.

Before starting work, measure the following indicators:

• Segment from the center of the calf to the ankle;
• Cut from knee to mid-calf;
• Calf circumference;
• Calf girth;
• Leg coverage under the knee.

If during work you use a set of 5 knitting needles, then you will not need a pattern, but when creating a product that has a seam, you definitely cannot do without a pattern.

How to draw a pattern

Draw a rectangle on graph paper, where the length of the smaller side will be equal to the girth of the calf, and the larger length of the product.

Position the rectangle vertically, dividing the short sides in half. The vertical line should also be divided into two parts - it should mark the distance from the knee to the center of the calf, and from the center of the calf to the ankle.

Let's start marking the lines directed horizontally. On the lowest, mark the circumference of the ankles, and on the top, the circumference of the leg under the knee. Having drawn a smooth curved line, we connect the extreme points.

Do not forget about the lapels at the bottom of the product, they should be in the form of small rectangles. Now you can start knitting!

How to knit one-color leggings. Lesson for beginners

So, we offer the easiest knitting method for beginners. For work you will need:

• Needles No6;
• 2 skeins of yarn;
• Knitting marker.

Having typed 48 loops on the knitting needles, we close them in a circle, putting on a marker. We knit 5 cm, alternating two front and back loops. Then, having connected 10 cm with the main pattern, we proceed to adding loops. For every fourth row, add one loop on the right and left sides. Repeat this operation 8 times.

Test yourself: if you got 64 loops, then you can knit the main pattern. Having connected 30 cm of the canvas, begin to reduce the number of loops. On every second row, decrease one loop on the right and left sides. By repeating these operations twice, you should get 60 loops.

On the final 5-10 cm, use knitting with an elastic band, then fasten the loops and make an inconspicuous but strong knot. Congratulations, you have knitted your first sports leggings yourself!

How to knit leggings with stripes?

To create this product you will need:

• Set of toe knitting needles No2.5;
• Yarn in white and black colors (100 grams of each color);

To get striped fashion leggings, the knitting pattern will be as follows. First, we collect 72 loops from white threads, after which we proceed to knitting in the round. We distribute all the loops on 4 knitting needles, 18 on each. We knit 10 rows with an elastic band and 1 p. facial viscous, after which we knit 12 cm with openwork viscous.

Now take the threads of a different color and knit 1 row with knit loops, 5 rows of elastic, then 1 row with knit, after which 12 rows of openwork knitting. The final part is 10 rows of white elastic, after which we fasten the loops and the striped leggings are ready.

How to wear?

This accessory is versatile - it can be worn with streetwear and even formal office wear. You can safely combine leggings with shorts or a mini skirt. If we talk about shoes, then this piece of clothing can be worn with sneakers, shoes and boots.

Of course, in boutiques you can buy socks in a variety of colors, but factory-made products are not cheap. Why overpay, because with several skeins of yarn and knitting needles, you can create leggings that exactly match your taste.

In addition, the model you linked will be unique, and only you will be its sole owner.

Photo of knitted leg warmers

How to knit leggings with knitting needles yourself?

Initially, knitted leggings were part of sports uniforms. And to this day they are used by football players, people involved in aerobics. But over time, leggings began to be worn not only with sneakers, but also with high-heeled shoes. Gaiters can be knitted tightly and warm the leg, or they can be made with openwork knitting and provide only an aesthetic appearance to their owner.

Where to start for beginners?

Before knitting leggings with knitting needles, it would be nice for beginners to figure out what types of loops and patterns can be, read the description. The simplest products can be knitted using purl and facial loops. The front loops are knitted with knitting needles in the face, the wrong ones on the wrong side. So you get a simple one-sided canvas.

If you knit only the front loops or only the wrong ones, you will get a two-sided product. To knit more complex, you need to know other knitting options. You can find information about knitting, tips, lessons, videos, and the alphabet in our corresponding section on the website.

Knitting pattern for women's leggings "Owl"

This knitting is called garter. A simple elastic band can be obtained by simply knitting the purl and front sides in turn. It can be one facial, one purl, or two facial, two purl, etc. In order to fix the product, it will be necessary to make an elastic band from the lowered loops. It is called hollow.

Description of types of leggings

Gaiters can be plain, multi-colored or connected with any pattern. Beginners are not advised to immediately knit complex patterns. Because it is easy to get confused in them, and if the knitting process has not yet developed, then the loops will be different in volume, this will be visible in the finished product. For example, leggings with braids will look very nice, but beginners should not take on such a scheme. But to make stripes on the product they will be quite capable. The finished product is usually crocheted.

Do not use too thin or too thick yarn for knitting leggings. Leg warmers made of thin yarn are very difficult to knit, but they are uncomfortable to wear from thick yarn.

As a rule, for standard leggings, 48 ​​loops are cast on the knitting needles. But you can also focus on your own foot size.

How to take measurements? Description

Gaiters can be knitted with 2 or 5 knitting needles. It is difficult to say which method will be the most convenient. In the first version, the canvas will need to be sewn. And in the second case, the correct distribution of loops in a circle will be required. In any case, it will be necessary to take measurements:

• volume of the leg under the knee;
• caviar volume;
• leg volume;
• distance from the knee to the middle of the calf;
• distance from the center of the calf to the ankle.

If you make leggings without a seam, then you will not need a pattern. If the seam is present, then the pattern will definitely be needed.

How to make a pattern? Description

Take a graph paper and draw a rectangle on it. Its largest side is the length of the product. Smaller - calf circumference. Lay this rectangle vertically. The short sides will need to be divided in half. Connect their middles with one line. Now it will be necessary to mark the vertical.

From the line above, set aside the distances from the knee to the center of the calf and from the center of the calf to the ankle. Now it will be necessary to draw lines that will be parallel to the horizontal sides. On the line above, set aside the half-girths of the leg under the knee on both sides. On the lowest line, it will be necessary to postpone the ankle girth. On all sides, connect the ends of the lines with a smooth curve. At the bottom it will be necessary to make a lapel in the form of a rectangle. See knitting description below.

Knitting tutorial for beginners

You will need:

• 2 skeins of yarn, preferably Galway;
• circular knitting needles No. 6;
• knitting marker.

Knitting density - 24 loops and 16 rows. The length of the product is 40.5 centimeters, the width is 27.5. The diameter of the elastic band is approximately 13 centimeters.

Important note: the number of loops you cast on must be a multiple of 4. So if you want to increase the width of the gaiters, then simply cast on the knitting needles in all rows more loops by a number that is a multiple of 4.

Abbreviations to be used:

• l.p. - front loop;
• i.p. - purl loop.

Knitting pattern with knitting needles

1 circle: 2 slp, front behind the back wall of the loop, 1 ip;

2 circle: 2 l.p. together, nakid, 1 l.p. 1 i.p.;

3 circle: 3 l.p., 1 i.p.;

4 circle: 1 st, yarn over, slip two loops on the knitting needle on the right, transfer them to the knitting needle on the left, knit together behind the back wall of the loop; 1 i.p.

Work description

It will be necessary to dial 48 loops on the knitting needles, connect in a circle, put on a marker. Knit with an elastic band for about 5 centimeters. Alternate 2 knit and 2 purl stitches. Knit another 5-10 centimeters with the main pattern. Now start adding loops. On every fourth row, add a loop on the left and right. Repeat all of this about 8 times.

The result should be 64 loops. Continue knitting leggings with the main pattern. After 30 centimeters of the product is ready, you can begin to reduce the loops. To do this, in every second row, remove a loop on the left and right.

You need to repeat this action twice. You should have 60 loops. Knit the remaining 5-10 centimeters with an elastic band. Now fasten the loops, make a strong knot and cut the thread. You should get beautiful sports leggings. Like these ones:

What to wear with leggings?

There are many options here. They are very versatile, so they will look great with both a tracksuit and a classic one. Leggings will look quite fashionable in combination with jeans. They also go well with a short skirt or shorts. Gaiters can also be worn over shoes and boots.

Extravagant ladies can afford to wear leggings with sneakers. Gaiters can be worn in any season. For the summer, it is better to wear openwork light leggings, for winter, woolen ones with convex patterns are suitable, which will perfectly warm the legs.

In fashion boutiques, leggings will cost quite a lot, so why pay extra money if you can knit this wardrobe item yourself. With clear knitting patterns, this can be done in just a couple of days. All you need is a ball of thread, knitting needles and a crochet hook. Read the description carefully.