Do-it-yourself bows and hairpins from ribbons, lace, foamiran. How to make a ribbon bow? How to make a ribbon bow with an elastic band

Handmade things are much more valuable than bought ones. After all, you put a piece of yourself into them, creating not only with your hands, but also with your soul and heart. This is what happens in the case of bows made of satin or rep ribbon. Knowing the simple technique of the work process, you can create truly original and beautiful masterpieces.

The main thing here is a little patience, time, as well as stocks of some materials. With the help of various additional decors, you can easily make a beautiful bow at home, as a hair ornament or just a decor for clothes, a bag or a phone case. Read further in our article how to make beautiful bows from satin and rep ribbons.

Ribbon bows without fasteners

classic bow

A very simple but beautiful little bow that you can make in minimal time.

Manufacturing process:

Take a small silk ribbon of any color. Make small loops on different sides and put the loops on your index fingers.
Then slip one loop into the other and tighten the ribbon
Lovely, cute decor is ready!

Gift decoration bow

Now you can make a very beautiful and elegant bow yourself for this or that occasion and decorate any gift with it.

Manufacturing process:

Hold the ribbon between your thumbs and forefingers and form a ring out of it.
Continue to make the following rings, collecting all the resulting turns on the fingers.
After the middle of your bow, drag with a thin ribbon (separate section)
We remove the coils from the fingers and straighten the bow.

elegant bow

A beautiful and discreet bow made of rep ribbon.

Manufacturing process:

Cut two small strips from the ribbon, depending on the size of your future bow. Fold them into rings and lay them on top of each other, crosswise, as in the photo.
After that, in the middle, horizontally to our bow, you put the third piece of ribbon, folded in a ring. Put some pre-glue on the middle and sew the three pieces together.
Then cut a piece of ribbon slightly longer than the previous ones, and the second piece will need the same length, but with finished edges, as indicated in photo No. 5.
Turn your bow over and put a little glue on it and lay a piece of ribbon with finished edges.
From above we drip glue and wrap our bow in the middle with the second segment, as in the photo.

Voila! An elegant bow is ready.

two color bow

Beautiful, two-tone bow in which you are free to choose different colors of ribbons.

Manufacturing process:

Take a satin ribbon 2.5 cm wide. You will need 6 pieces of such a ribbon, 11 cm long. You need to take a separate tape in the middle 5 cm long and 1 cm wide. You will also need a glue gun, two pieces of felt, rhinestones, safety pins or sewing, a regular needle and thread.

Cut the desired lengths and fold one piece of tape as shown in the photo, securing the fold with a sewing pin.

After we turn over our piece of tape and wrap its edge to the left.

We make another fold and fix it with a needle. We sew our petal and tighten the thread. The edge of the petal can be fixed with glue.

We continue to make petals, three of one color, three of another.

After we glue 4 petals, 2 pieces on each side, onto a piece of felt using a glue gun. Then in the middle of each side we glue one more petal.

The middle of our bows should be wrapped with a thin piece of ribbon, glue it, and glue the decor in the form of rhinestones on top.

Volumetric bow

An original decoration that is perfect for a girl in kindergarten or first grade.

Manufacturing process:

To begin with, we make 5 roses from a satin ribbon. To make a rose, take a piece of tape 50 cm and 5 cm wide. Fold the tape in half and make four folds from one edge and fix it with a thread. After we make one turn outward, after the second and fix it with a thread. We continue to make the third and fourth turns, after which we fix them again with a thread. Then follows the fifth and sixth curl, fix with a thread. We make the next seventh and eighth turns in the same technique, but we try to make the bend a little lower than the center of the previous turn. We fix the turns with a thread and continue to make turns in the same technique until the end of the entire tape.

The last turn, the end of the ribbon, is to bend the roses down and sew with a thread. The tip of the tape should be melted so that it does not crumble. After we glue a circle of felt on the bottom of the rose, on which we make two cuts for inserting an elastic band into it. We glue the circle only around the circumference, without applying glue to the middle.

After that, on a decorative elastic band 24 cm long, we insert a rosette through the holes in the felt. Then we take a wide satin ribbon measuring 5 cm in width and 24 cm in length (4 pieces). We add one circle from two pieces and exactly the same second. We fix their ends with a thread, and then sew them together in the center, forming a bow. We wrap the middle of the bow with a thin ribbon and attach a large rhinestone to the middle if desired.

Then we fix our gum with threads and glue a bow to it.

Ribbon bows in the form of hairpins

Butterfly bow

A beautiful and attractive butterfly bow in a minimum amount of time.

Manufacturing process:

Take two satin ribbons equal to each other and make two rings out of them.
In a separate piece of ribbon, it is worth sewing the edges or soldering, as indicated in Figure No. 4.
Then take two rings and sew them in the middle. By the way, the fusion point can not be sewn, but glued with a glue gun.
Then, in the middle of our stitched rings, you add the finished center with soldered edges. Sew its edges and attach the bow to the main part of the hair clip or elastic band.

flower extravaganza

A beautiful bow-hairpin, which is suitable for holidays, celebrations or performances.

Manufacturing process:

Take a wide ribbon about 4 cm and cut 6 pieces out of it.
String them on a thread using a regular sewing needle and pull off the petals.
Then we proceed to the second layer. Cut 6 pieces of ribbon 2 cm wide, and put a shiny rhinestone flower decor on the first layer (just the outline of a flower, to give a shiny bow) and put a second layer on top like the first one, sewing them together. By the way, you do not have to choose rhinestones, it can be any other shiny decor.
In the middle of our bow, you can glue a large rhinestone, decorative stone or other decoration. Glue your bow to the base of the barrette and you're done.

Star bow

The basis for such a bow is best chosen in the form of an elastic band, and not a hairpin, it will be more convenient and more beautiful.

Manufacturing process:

To begin with, we cut out an asterisk of two sizes from thin cardboard. We make a round hole in the middle of the template and thread the tape through it. It is better to take an openwork ribbon so that the future bow looks richer.

Then wrap our star blank with a ribbon, as shown in the photo. Follow the instructions carefully, otherwise the asterisk may not work. When you are done, you need to sew the middle with threads so that the asterisk does not fall apart.

After that, we move on to the rep tape, having previously singeed its ends so that the tape does not unravel during operation and operation. We wind our tape on the workpiece according to the same principle as with an openwork tape. We sew the middle.

Then we make another star from an openwork ribbon of a smaller shape. To do this, we use a second blank, a smaller asterisk. We sew any decor into the middle of our openwork star and sew an asterisk from a rep ribbon from below.

After we sew a rep star under the bottom, an openwork star, which we made the very first. And then we sew the base of the elastic band, for reliability, fixing it with a flat tape.

satin bow

Simple, original bows made of satin ribbon based on an elastic band will suit you with different outfits, beautifully decorating your hair.

Manufacturing process:

Take 4 pieces of tape 5 and 6 cm wide.

Be sure to singe the ends of the tape with a lighter so that the tape does not fall apart during operation. The segment itself must be folded in half and the ends of the tape bent inward.

It turned out a petal, which we pull together on a thread with the second petal.

We collect the second pair of petals and sew them together in the middle.

From below we sew the base of the elastic band, and then proceed to the design of the middle.

Take a piece of rep ribbon in a different color and wrap it around the middle of your bow, as shown in the photo. Use a glue gun to glue it to the middle and the bow is ready.

Elastic band bow in kanzashi style

A beautiful kanzashi-style bow suggests a flower-shaped bow, which is perfect for any occasion.

Manufacturing process:

Take one ribbon 2.5 cm wide in blue, and one in white. You will also need decorating décor, a ruler, scissors, glue, tweezers, and matches. Cut 11 x 8 cm pieces of blue ribbon and 6 x 8 cm pieces of white ribbon.

Bend the first piece of blue ribbon diagonally, then fold again and connect the bottom, thereby forming a petal. Be sure to burn the ends of the ribbon with fire so that it does not fall apart during operation.

We continue to make petals from other pieces of blue and white ribbon, not forgetting to singe the ends. After we cut out a circle from the tape and glue blue petals to it. Glue only 8 pieces. Glue the white ones over the blue ones, and then glue the blue ones, as shown in the photo.

A pebble or rhinestone is inserted into the middle with glue.

We attach an elastic band to the base of the bow and beautiful, the decoration is ready.

Bows can be made from different satin, rep, organza, lace, brocade, etc. ribbons. They can decorate hair by attaching it to various bases, such as elastic bands, hairpins, headbands, brooches and similar attachments. I have been fascinated by this type of creativity for more than 5 years, I am very attracted by the beauty, grace and variety of bows and flowers that you can create from ribbons with your own hands. It's great that now, with the help of the Internet, I can share my experience with a large number of beginner craftswomen, as well as experienced ones who are looking for inspiration or just continue to improve their skills.
I also continue to constantly study and look for new ideas and techniques, so it would be great if you also share your experience or valuable tips at the end of the article.

Do-it-yourself ribbon bows for a school step by step instructions

I think the topic is relevant for many, since many craftswomen have daughters or make them for sale, and the school theme is always in demand.

For manufacturing, I use different types of ribbons, these are rep, satin and lace.
Rep 2.5 cm wide and 21 cm long, I took different colors, one white with small peas, the other dark blue. We burn the edges of the ribbons so that they do not crumble and it is convenient to work with them.

We bend the segment in half and mark the middle, stroking the fold with your fingers.

Now we wrap the edge of the tape in such a bun to the marked middle.

We wrap the second edge in the same way.

We sew in the middle with a thread, I use monofilament, it is transparent and goes with ribbons of different colors.

The second piece of tape is twisted and stitched in the same way as the first.

We pull them together and stitch through them several times to securely fix and tie the thread into a knot.

For the lower part of the bow, we take 2 pieces of lace 4 cm wide and 2 pieces of satin ribbon 2.5 cm wide and all pieces are 21.5 cm long.

We put them together lace on top, satin on the bottom, scorch the edges with a lighter and press the ribbons together so that they stick together at the edges.

Now on these we also mark the middle and fold the edges to it, stitch it.

We tighten and firmly fix.

At this stage, I sew an elastic band to the bottom bow.

I put all the parts together and select a suitable middle.
I like this one!)

I glue each other with Moment glue, it is transparent and glues fabrics well.

The last step is to glue the middle.

All our school bow is ready, now you can dress up your daughter for school.)

Back side.

Do-it-yourself school bow from rep ribbon

Our next bow will consist of a narrow rep ribbon 0.5 cm wide in white and blue.
We need to cut segments 8 cm long - 1 pc. each color (I cut off extra 2 pieces in the photo), 7 cm and 6 cm, 2 pieces of each color.

Fold each piece in half and glue.

For the base you will need a small piece of felt.

On a piece of felt we glue our pieces of tape, the smallest 6 cm, on one side in blue and on the other white, we try to place them evenly.

Then glue the next layer of 7 cm segments.

And now glue the last 2 pieces of the longest 8 cm each.

For the lower part of the bow, you will need a piece of lace 4 cm wide and 15.5 long.

We fold it in half and sew it together.

These are the 2 parts we should get.

We glue them together.

We take a hairpin machine and sew.

Then we sew the middle on a narrow ribbon, I have such a cute little penguin.)

And glue to the hairpin.

That's all, our hairpin with a bow is ready, you can wear it!

Looks very nice on hair
Do you like it? Share below in the comments.

Also see a master class on making kanzashi flowers with sharp petals.

A variety of accessories traditionally adorn girls' hair. But even as adults, it is difficult for us to refuse them. They refresh our handbags, hats and dresses, make the most everyday hairstyle festive. A beautiful bouquet looks even more elegant if you tie a small tulle or organza bow on it. But that's not all. Beautiful packaging is very important for a gift. A paper bow, originally tied on the box, will emphasize the solemnity of the moment. In the store you can find any bows for girls, interesting hairpins.

Making a bow out of fabric with your own hands, you emphasize your originality.

It is not difficult to figure out how to make a bow from a ribbon with your own hands.

Any girl will be delighted if her mother makes her own hair ornament, decorates it with beads or beads, sequins or tulle. Before you make a bow out of fabric, you need to understand its purpose:

small, made on a fork - for a small souvenir;
satin ribbon bows - for girlish hairpins;
lush, brightly decorated - for a children's holiday;
paper - for gift wrapping;
unobtrusive, elegant - for any dress;
for interior decoration.

Before you make beautiful bows from satin ribbon, you need to choose the right one. Its color should be in harmony with the dress or hat. There is no need to explain how to make a satin ribbon bow in the traditional way.

Let's try to make a beautiful multi-layered product from ribbons of different colors and widths tied together. Purchase material in 3-4 colors of different widths. The widest ribbon should be the longest, the narrowest the shortest. Trim the ends at an angle so they don't fray. Lay out the strips of fabric so that the bottom is the widest strip, the top is the narrowest. Tie them in a narrow strip, leaving long ends to strengthen the jewelry on a gift or hairpin. Add some beads.

You can make very elegant ribbon bows with your own hands, step by step instructions will help you with this. From a ribbon of small width, you can create an elegant and elegant accessory.

Follow these steps:

Cut out a circle with a diameter of 2 centimeters from thick paper.
Cut the tape into pieces 6-7 centimeters long.
Using a glue gun, glue the end of one segment, glue the other end of the same segment after 5 mm.
Place the end of the second segment between the glued ends of the first segment, place the second one after 5 mm.
Glue several rows of such loops in this way, the last two rows may be smaller.
The middle of the flower can be enlivened with rhinestones or beads.

Consider another method of how to tie a bow from a ribbon. To get this elegant openwork bow, you will need satin ribbon, glue, scissors and a stapler.

The tape must be cut into 4 parts of different lengths, connect the ends of each segment with glue. Lay the loops in size and fasten in the center with another strip. Tie a knot nicely, leaving fairly long ends. This elegant decoration will look great on a gift.

With a fork

Sometimes a very tiny bow is needed to decorate a postcard, make tiny earrings, or dolls. Consider how to tie a bow on a fork.

You will need a thin ribbon 0.5 cm wide and 10 cm long, a table fork and scissors. How to make a bow on a fork is clear from the following diagram. The mini bow is very easy to make.

A more complex bow from a ribbon on a fork will take a little more time, but the technique for creating them is very simple, a master class is not needed.

Kanzashi technique

The term kanzashi means folding. Using this technique, you can make bows from ribbons folded in a certain way. It allows you to create amazing things, and the step-by-step instructions given here will help you make kanzashi bows with your own hands.

To make a bow for girls with your own hands, you will need:

dark satin ribbon 5 cm wide;
the same white 2.5 centimeters wide;
the same dark 2.5 cm wide;
threads of a suitable color;
scissors, needle, glue;
hair clip or elastic band.

Do-it-yourself hair bows are made as follows:

Three pieces of 22.5 centimeters are cut from a wide dark ribbon, and three pieces 15.5 centimeters long are cut from white.
We burn the edges with a lighter, fold the segments of the dark segments in half, unfold and fold the ends with a small allowance. We strengthen the thread to the middle.
We do the same with the second segment, and superimpose it on the first, fix them. The third, also processed segment, is superimposed on top of the first two. We tighten the thread, tighten the bow, wrap it with a thread and sew it.
We carry out all the same operations with a white ribbon, we get exactly the same bow, but it will be smaller in size.
We glue a white bow on a dark one, wrap the middle of the product with a dark narrow ribbon, fix it well. If you planned to make an elastic band, then before tying the ribbon, lay the elastic there.

From rep ribbons

Before you make a bow from a satin or silk ribbon, make it from rep ribbons. Reps keeps its shape well, does not wrinkle.

You will need rep ribbons of different widths and patterns, a needle, thread, glue, an elastic band or a hairpin and all kinds of jewelry. Before you make a beautiful bow out of ribbons with your own hands, decide on its size, the width of the rep ribbons depends on it.

Cut out a rectangular template from plywood, the smaller side of which is equal to the width of the bow. Make a cut in the center of the figure. We impose a tape on the template so that the ends are directed in different directions. How many curls do you want for a bow, how many turns are needed. The ends of the tape must be fastened. With a seam forward needle, sew the ribbon through the through hole in the template. Remove the template, tighten the thread.

Usually this decoration has several layers. You can decorate the core with beads, you can wrap it with a thin shiny braid. Tie it tight and the decoration is ready.

Paper decorations

You want to pack a gift beautifully, and the question arises of how to make a paper bow with your own hands. Paper decorations can be of different colors and sizes depending on what they are intended for. The simplest do-it-yourself bows can be made in a few minutes. By the way, they can decorate the Christmas tree.

Before you make a bow for a gift, draw what shape your product will have, cut it out. Glue the jumper between the parts with glue, bend the sheets in the middle until the edges match. Lubricate the center of the second part with glue, place the first part on top, aligning the centers. Wrap the pieces with a strip of tape and glue them together.

Handmade accessories will never go out of fashion. Needlewomen will always be interested in questions about how to decorate your hair and dress in an original way, how to make a small bow for a bracelet, elegant bows for your daughter to school, an unusual decoration for a handbag, how to make a bow out of rubber bands, how to decorate your home, make it cozy. Having mastered these skills, you can always add a twist to your outfit, decorate a gift beautifully, and make the interior of your home interesting.

Lush, colorful, huge and small bows have always been a fashionable decoration and an emblem of femininity. Even our grandmothers, braiding braids, used a ribbon, and its tip was tied into a cute bow.

Such a device will emphasize a beautiful outfit, also resurrect a gloomy and sour image - just stab it and - voila - the appearance is instantly transformed.

Now, compared with previous years, a huge number of hairpins and elastic bands from ribbons have appeared on the market. The abundance of shapes, colors, sizes - the choice is large and no matter which beauty will be able to choose what she wants.

Decorate the curls with a cute bow to make the hairstyle play out.

The cost of these products is quite affordable. But what if you want to have a special hairpin that will be made specifically for your outfit and hairstyle, and with all this, it will be one of a kind?

Bows for every taste

Colorful options for hair jewelry for little fashionistas

Specifically, in such cases, we recall that everything can be done at home, all the more so that do-it-yourself bows from ribbons for hair are not so difficult to create as it seems at first glance (read also the article “Hair clip Crab: one for all occasions).

Naturally, this is not a matter of a matter of minutes, here patience and perseverance will come in handy, but believe me, the time spent and your work will be rewarded to you - exalted looks and compliments will be provided to you.

How to make bows from ribbons for hair, we will tell further.

Create different shapes of bows

Stylish look for kids and adults

Before starting work, determine what shape and size you would like to make the product. Do not be afraid to show imagination and experiment with size, material and coloring, combine different qualities and colors - this way the device will come out especially unusual and unusual.

Pay attention! Before work, pay due attention to the choice of tape material. Try to take one that is quite compacted - then the bow will keep the given shape. Materials such as satin, silk, satin, linen, cotton, velvet, etc. are suitable.

The choice of color, width, shape is always yours

Do-it-yourself ribbon hair bows are made by various methods and come in various types, the following are more common options:

satin product. To make an ordinary hair bow from a ribbon with your own hands, you will need a ribbon of approximately 20 cm, it will need to be folded in half. You will receive a loop that must be lowered down. So you will have two small loops that need to be crossed together, turning one into a circle and slowly stretching it out.

Option to create a bow

Flower bow. To create an unusual and beautiful device, it is better to choose a ribbon of medium width. You need to twist the tape in such a way that the resulting 1st turn is crossed with a tip.

Such deeds should be carried out until such time as you are satisfied with the splendor of the flower - adjust it to your liking. Fastening is carried out with the last turn and tying with a knot in the center.

Product with decor. To create the next device, get a wide dense ribbon, the edges of which you need to sew together to make a circle. Sew two of these rings.

Fold the rings on top of each other and press down so that the junction is formed at the seams. Cut a small piece of ribbon and tie the rings around it.

The size of the bow allows you to decorate it with additional decor - so you can stick sequins, rhinestones, and beads on it. The middle can be decorated with a bead, a button or a huge stone.

A fork is a good tool for creating a small bow.

small bow. Not sure how to make a bow out of a small hair ribbon? Then the fork will help you.

Take a thin ribbon, wrap it around the fork so that one edge of 5 cm remains free. Wrap the long tip around the fork and pull it out from the bottom of the short edge. Then it must be held in the center of the cloves of the fork on top of the tape and lowered down.

Lift the end of the ribbon and thread it through the loop. Now tie a knot. Adjust the length of the ponytails.

A bow can be glued on an invisibility or a hairpin, it will look simply charming in combination with any hairstyle.

Advice! So that the bow does not bloom, and the threads do not interfere, carefully draw its edges over the fire, it is most convenient to do this over a candle, but be careful not to stain the ribbon with wax. Act quickly so as not to burn the material, and the edges remain smooth with all this.

There are a huge number of methods for performing, add your imagination here, and as a result there will be a unique hairpin

We sew a South American bow

How to make hair bows from ribbons with multilayer loops? This question appears in many women who are already tired of standard bows. A multilayer bow is called South American, and to create it, you need to prepare all the materials.

Rep ribbons will come in handy - for the base, take three ribbons, the width of which will be different. The background will be decorated with ribbons of 3-4 types, the width of which can be 1-2.5 cm.

In general, choose the size and outline according to your own taste, but so that everything together looks harmonious. Also prepare cardboard, scissors, glue, lighter, needle and thread.

Making such a product will not be very difficult, and a step-by-step annotation with a photo will help you make a perfect South American bow:

To make curls, take cardboard measuring 15 × 7.5 cm.

Using scissors, cut a line in the center, about half a millimeter wide and about 4 cm long.

Prepare three cardboard templates, but the length of the cut strip on each should decrease by 2.5 cm, the width remains constant.

Take the 2.5 cm tape and use a clip to attach it to the edge of the cardboard near the cutout.

Wrap the tape around the cardboard, and in the middle of the cut out strip, pierce it with a needle. Then remove the tape, with all this, without touching the needle.

Hold the tape so that its tail is on top, carefully separate the turns to the sides, but so that the center remains fixed with a pin.

Fix the middle with a needle and thread, making a few stitches.

Do the same with other ribbons and templates.

Cross a couple of ribbons of a similar color and size, and pierce the center with a needle.

Do the same actions with the following segments, but with all this, layer the layers one on top of the other. Make a perfect X-shape. When everything is done, in your opinion, perfectly, fix the middle with a few stitches and wrap it a couple of times with a thread.

Connect together all the resulting parts. You can do this by tying them with a thread a couple of times.

On the reverse side, fasten the retainer to the hair, for this you can choose an elastic band, invisible, crocodile, or an ordinary clip.

Summary

Summing up, we want to note that do-it-yourself hair bows from ribbons are not only saving money, but also a manifestation of your peculiarity, because only you will have such an ornament. We wish you creative flights and fantasies (see also the article “Kanzashi hair bands and other decorations”).

Well, the video in this article will depict in a pleasant way the whole process of creating an unusual scenery.