Knitting openwork braids. Openwork braids with knitting needles: description and diagrams

Openwork pattern with knitting needles

Description of work

Pattern repeat consists of 25 loops + 2 edge stitches.

1st row:1 cro., 1 p., 1 yarn over, 2 knits., 2 p. together with a tilt to the right, 5 p., 2 p. together with a tilt to the left, 1 yarn over, 1 knit., 1 yarn over, 2 p. together with tilt to the right, 5 p., 2 stitches together with a tilt to the left, 2 knits, 1 yarn over, 1 purl, 1 chrome.

Row 2 and all even knit rows according to the pattern.

3rd row: 1 chrome, 1 purl, 1 knit, 1 yarn over, 2 knits, 2 stitches with a tilt to the left, 3 purl, 2 stitches with a tilt to the right, 1 yarn over, 1 knit, 1 yarn over, 2 p. together with a tilt to the left, 1 yarn over, 2 stitches together with a tilt to the left, 3 p., 2 stitches together with a tilt to the right, k2, 1 yarn over, 1 knit, 1 p., 1 edge.

5 row: 1 chrome, 1 purl, 2 knits, 1 yarn over, 2 knits, 2 sts with a tilt to the left, 1 purl, 2 sts with a tilt to the right, 1 yarn over, 2 sts with a tilt to the right, 1 yarn over, knit 1, 1 yarn over, 2 stitches with a left bend, 1 yarn over, 2 stitches with a left bend, purl 1, 2 stitches with a right bend, knit 2, 1 yarn over, knit 2 ., 1 purl, 1 edge.

Every craftswoman is simply obliged to know how to tie braids. After all, these are very beautiful patterns; they can decorate many knitted items. For beginner knitters, some patterns may seem difficult. We advise you to try to knit a braid pattern using the knitting patterns and descriptions of which are presented in this article and see for yourself that everything complex actually begins with something simple. Follow the instructions in the diagrams and you will succeed!

Abbreviations used in descriptions:

pattern repeat - P;
front rows - LR;
purl rows - IR.

"Gertrude"

In this criss-cross pattern, the braids are decorated with bridges. This braid looks especially good on voluminous items.

The number of points must be a multiple of 24 + 15 points + 2 cr. The pattern should be knitted according to the pattern.

The diagram shows only LR, in IR we knit all stitches according to the drawing. We start LR with 1 cr., then repeat P the required number of times, ending with 15 p. to the arrow and 1cr.
Vertical P consists of 1p. 16 rub.

"David"

Knitted with diverging and converging braids, a pattern for medium and thicker yarn.

The given diagrams show how to knit such a pattern in two versions: a braid pattern for forward/reverse and for circular knitting.

For forward/reverse braid knitting, the number of stitches must be a multiple of 24 + 2 stitches + 2 cr. We start and finish the row - 1cr.

For circular knitting pattern, the number of stitches is a multiple of 24.

"Robin"

Combined embossed braids and plaits look great not only on clothes, but also on pillows and blankets.

The given diagrams show how to knit such a pattern in two versions: for forward/reverse knitting and for circular knitting.

For forward/reverse braid knitting, the number of stitches should be a multiple of 12 + 7 stitches + 2 cr. We start and finish the row - 1cr.

For circular knitting pattern, the number of stitches is a multiple of 12.

Combined braid pattern

An interesting combination of weaves of different widths gives the knitted pattern additional charm.

We knit using knitting needles according to the pattern that shows only the LR. For IR loops we knit according to the visible pattern.

Horizontal R consists of 12 p., Vertical R - with 1 p. 18 rub.

Braid pattern with paths

The presence of vertical paths from facial loops visually “stretches” the overall pattern. The combination knitted using this algorithm is suitable for adult and children's patterns made from medium-thick yarn.

We knit according to the pattern that shows only LR. For IR loops we knit according to the visible pattern.

Horizontal R consists of 18 p., Vertical R - with 1 p. for 32 rubles.

Braids with leaf patterns

A charming composition of braids and small leaves looks great on jumpers and cardigans.

Knit the braid pattern with leaves using knitting needles according to the pattern that shows only LR.IR, we carry it out according to the drawing. A green cell in the diagram means there is no loop.

The horizontal and vertical P of the pattern are equal to 23p, respectively. and 27r.

Curly braid

The figured braid is knitted with simple crosses of 4 loops. How to knit such weaves is described in detail in the instructions below the diagram.

On сх. Only LR are shown. We carry out IR according to risk.

Horizontal P is equal to 14p.+2p.+2cr. We do it vertically once with 1p. 18 rubles each, then knit, repeating from the 3rd row.

Openwork braid pattern with knitting needles

This braid looks best when made with thick, medium-thick yarn. This is a wonderful pattern for women's summer blouses and tops.

On сх. Only LR are shown. We carry out IR according to risk. We knit the yarn overs in the IR purlwise. P.

Horizontal P is equal to 16p.+3p.+2cr. We start knitting from the loops in front of the P. The vertical P is equal to 1p. 26 rub.

Braids on the reverse surface

The intricate weave gives the product knitted with this pattern elegance and originality.

On сх. Only LR are shown. IR is carried out according to the drawing.

Horizontal P in diagram. indicated by arrows, vertical P is equal to 40r.

“Braid and mesh” pattern with knitting needles

Detailed patterns and descriptions explain how to knit this interesting pattern. Contrary to popular belief that braids are a pattern for thick, warm clothes, try knitting a summer blouse with such braids with a mesh.

The braid checkerboard holds the fabric well, preventing the knitted product from stretching and losing its shape. Braids and mesh are knitted in a number of stitches that is a multiple of 22 + 1 stitch + 2 stitches. On сх. Only LR are shown. We carry out IR according to risk.

Vertical R – 28 rub.

Braids “Shell”

Knitting patterns that are monotonous and rustic at first glance often look completely different in the finished product. This option is exactly that. Try using it on a women's pullover and you will be pleasantly surprised by the result.

How to tie such braids - see the diagram. It has LR and IR.

P contains 12p.+2cr.+7p. for symmetry of the drawing. In height we repeat from 1p. 8 rubles each

Wide openwork braid

This knitted pattern of a wide openwork braid and narrow side braids is perfect for youth jumper models.

A detailed knitting pattern for beginners shows LR. How to knit the wrong side - look at the visible drawing. We knit yarn overs in IR using purl stitches.

Horizontal (marked with a bracket in the diagram) and vertical P are respectively equal to 26p. and 20r.

Such braids look good on children's things and small interior items. The braids hold the shape of the fabric, preventing it from stretching.

On сх. LR, IR are shown, we knit according to the drawing.

Braids with shadow

This pattern is a continuous interweaving of loops. They are all knitted.

On сх. Only LR are depicted. Purl The side is knitted purl. P.

Horizontal P consists of 15p. For knitting you will need additional. spoke. If desired, moving the loops can be done with a crochet hook.

Thick braids

A beautiful convex braid pattern is suitable for knitting bulky items.

Description:

1p. (LR): 6p., *2p., 10p.* – from * to * repeat to the extreme 8p., 2p., 6p.;
2 rub. and all IR: 8l., *10i., 2l.* – from * to * repeat to the extreme 6p., 6l.;
3p.: like 1p.;
5p.: 6l., *2i., remove 5p. for extra sp. at work, 5l., 5l. with additional knitting needles, 2i., 10l.* - from * to * repeat to the extreme 8p., 2i., 6l.;
7r., 9r.: like 1r.;
11r.: same as 5r.;
13r., 14r.: like 1r.;
17p.: 6p., *2p., 10p., 2p., remove 5p. for extra sp. at work, 5l., 5l. with additional knitting needles * - from * to * repeat to the extreme 8p., 2i., 6p.;
from 19 rub. for 21 rub.: as 1 rub.;
23r.: like 17r.;
24 rub. (IR): like 2p.

Chain of braids

The pattern is simple to make and universally applicable.

A detailed diagram shows the LR. How to knit the wrong side - look at the visible drawing. We knit yarn overs in IR using purl stitches.

P is equal to 5p.+2p. for symmetry + 2cr.

Braids with elongated loops

This very delicate pattern can be used when knitting women's blouses, jumpers, and hats. For beginner knitters, the pattern may seem a little complicated.

Horizontal P is equal to 18p.+2cr. On сх. LR and IR are depicted. LR should be read from right to left, IR - vice versa. We perform it once with 1 ruble. 12 rubles each, then repeat from 3 rubles. 12 rub.

Explanations for the diagram:

1r.: 1i., 3l., 1l. from 3n., 8l., 1l. with 3n., 3l., 1i.;
2p.: 1l., 3i., 1p. pull out (drop the yarn overs, transfer to the right sp., without knitting, thread before work), 8i., 1p. pull out (repeated), 3i., 1l.;
3r.: 1i., 2l., 1l. from 3n., cross the elongated st. to the left from 4l. (remove the stretched one, knit 4 knits, then knit the stretched one), cross the stretched one to the right with 4 knits, 1 knit. with 3n., 2l., 1i.;
4r. and further: we read similarly according to the diagram.

Small paired braids

A neat pattern for knitting with threads of medium thickness. Ideal for children's items.

Knitting patterns for braids are designed for forward/reverse knitting and for circular knitting. LR and IR are shown.

Horizontal R is 7p.+3p. for symmetry + 2cr. Repeat vertically from 1p. 6 rubles each

Braids with extended transitions

A simple pattern on the back of the ch. will decorate any thing. Looks good on interior items, such as pillows.

You should dial 18p.+3p. symmetry + 2cr. Repeat in height from 1p. 12 rub.

Miniature braids

A very elegant pattern that requires some patience to complete. It is better to use yarn that is not very thick, otherwise the braids will look ugly.

The diagram shows LR and IR.

The initial set is 10p.+2cr. In height we perform from 1p. 16 rub.

Braids - buds

An interesting solution to the classic pattern is suitable for knitting various things for adults.

How to knit LR is shown in the diagram; in IR we determine it by drawing.

The initial set is 19p.+1p.+2cr. In height we perform from 1p. 14 rub.

Braids with fine lace

The fabric knitted with this pattern holds its shape firmly and does not stretch. The pattern can be used in various models of clothing and when knitting interior items.

The diagram shows LR and IR.

The initial set is 16p.+8p.+2cr. Repeat in height from 1p. 12 rub.

Beginning craftswomen, when planning to knit something, usually choose simpler patterns. And this is right - having honed your skills on simple patterns, you can begin to work on more labor-intensive, but beautiful designs. From this kind of abundance we can distinguish simple “braids” or “harnesses”, which are basically the same thing. The only difference is in the knitting technique: braids are one overlap of certain loops, and plaits are a whole system of overlaps folded into one complete pattern. But since the technique for performing them is similar, they are therefore combined into one type. Both subspecies will be discussed later in the article.

"Braids"

Knitting with knitting needles is not a difficult task, it will just be a little awkward to do at first. To knit them, you will need additional knitting needles or pins - you will need to remove the loops on them before crossing them. The movement of the loops in the pattern can be to the right or to the left - it depends on the pattern that is knitted on the fabric. When using braids to decorate shelves, a certain symmetry in the intersection of loops should be observed.

Simple "braid"

To knit a simple “braid” you will need to separate 8 loops on the main fabric - the number of loops can be changed, but you should take into account that the cross does not lead to the formation of a hole and the corresponding assembly of the fabric. To knit a sample, you will need to cast on 14 loops, 8 of which are the “braid” itself, 4 loops are needed to highlight it, and 2 are edge loops. Next, the sample is knitted in the following sequence:
1. First row: edge, 2 purl, 8 knit, 2 purl and edge.
2. Knit rows 2, 3 and 4 according to the pattern.
3. Fifth row: edge, 2 purl, remove 4 pieces onto a pin or auxiliary knitting needle, without knitting and holding before work, knit the next 4 loops, transfer the loops from the pin to the left knitting needle and knit, it turns out to be crossed to the left. Picking up stitches on a pin or auxiliary needle and leaving them behind the fabric leads to the formation of a crossing to the right side. Complete the row with two purls and an edge stitch.
4. From the 6th to the 12th row you should knit the way the knitting looks, and then cross the loops as in the fifth row.
The considered pattern is suitable for making any thing. You can make “braids” in a row on the canvas - it will look very beautiful. The same pattern looks good on hats, sweaters, vests, scarves and other things, both for children and adults.

Simple double braid

This pattern consists of two weaves, but they are not at all difficult to make. In it you can change the number of loops in the weaves, the distance between the “braids” and it is possible to “dilute” with other relief patterns. To complete the pattern, you need to cast on so many loops so that their sum is a multiple of 12, add three loops to them for symmetry and two edge loops. In the example discussed below, you should cast on 17 loops.

Knitting must be done in accordance with the following pattern:
1. Rows 1 and 5 are knitted in the sequence - edge, knit 3, purl 3, complete the strip with purl 3 and edge.
2. The second row and all the reverse rows are knitted according to the pattern.
3. In the third row, you need to cross to the left side, in the manner described below - remove the edge, make three purl, then three knit, slip the next three loops onto a pin, and purl the three following them, return the loops from the pin and make their faces. Finish the strip with three purls and an edge stitch.
4. In the 7th row you need to cross to the right side. Perform in sequence - edge stitch, 3 purl stitches, slip the next 3 pieces onto a pin, knit 3, return the loops from the pin and purl them, knit 3, purl 3 and edge stitch.
Starting from the 9th row, repeat the pattern from the beginning of the rapport.
Based on “harnesses” and “braids”, more complex patterns are created, for example, “braiding”. Gradually gaining experience, any craftswoman can master this. Making complex designs on products makes them stylish and unique, emphasizing their individuality and beauty.

"Tourniquets"

This pattern is the crossing of one or more loops against the background of the main fabric. “Braids” are made using the same principle, only in this case the number of loops is taken from 3 to 12. From this series there will also be “aranas”, which are made by interlacing cord compositions and are similar to the weave of baskets, braids and fabrics.
For inexperienced needlewomen, you can master the patterns of knitting “harnesses”, starting with the simplest ones.

Harness pattern - vertical stripes

The presented pattern is easy to perform - only 4 loops are used and then crossed. The stripes are embossed and quite expressive, as a result of which they can be used in any product. The pattern is especially good when made from thick yarn.
To complete the example on knitting needles, you need to cast on a number of loops that are a multiple of 6 and add 2 loops to them so that the pattern is symmetrical, and two edge loops. For example, it will be 34 pieces. Next knit following the sequence:
1. First row: edge, knit 2, then repeat - purl 4, knit 2 - do this until the end, knit the edge purl.
2. Second row: purl 2, then cross two loops to the right, for which you knit the second loop, stretching it in front of the first, and then knit the first. Cross the next loops to the left: knit the second loop behind the first, and then knit the first. Finish the row with two purls and an edge stitch.
3. Third row: repeat the pattern starting from the first row.
It is necessary to take into account that the pattern itself is formed on the reverse side - watch the placement of the front and back sides when casting on loops and subsequent knitting.

"Harness the Barrel"

A simple pattern that does not require effort, suitable for creating any thing. To complete the pattern given in the example, you need to cast on a number of loops that is a multiple of 5, add one for the symmetry of the pattern and 3 edge stitches. Let it be 33 pieces, which are knitted in the following sequence:
1. Knit rows 1, 5, 7, 9 in the sequence - edge, purl, then repeat - knit 4, purl, final edge.
2. Even stripes are knitted the way the knitting looks.
3. Third row: edge, purl and rapport - cross 4 loops to the left, remove the first loop on a pin, holding it before work, then knit 3 front loops and only then one removed from the pin. Finish the purl and edge row.
4. Knit the pattern up to the tenth row, taking into account the instructions presented above, from the 11th row, perform the pattern from the beginning.
There are a lot of types of braids and harnesses - those presented in the article are the simplest. To create knitting patterns with braids and plaits, you can learn more in the video knitting lessons. A video and a selection of schemes for realizing your fantasy are presented later in the article.
Goats and plaits turn out to be not so difficult to perform, but rather labor-intensive in counting loops and making overlaps - this is difficult for beginners to do. For dexterity, it is advisable to use simple braids, but in the future you can take on more complex variations.

It may be a little difficult for beginners to knit such patterns, but how impressive! Most patterns with openwork braids are based on knitting a simple braid. To make it easier to understand the diagrams. Although there are other options, sometimes the relief of the braid is formed through openwork knitting techniques - yarn overs and knitting several loops together.

Patterns with openwork braids are suitable for a dress, tunic, blouse or pullover. And it is not at all necessary to knit the entire product in one openwork pattern. You can make openwork inserts along the edges of the shelves, or knit only the sleeves with openwork, and use the front or back stitch as the main pattern. If you are knitting a warm dress with a braid pattern, you can put one or two openwork braids from the left of the center of the product - it will look very elegant.

Pattern 1

Description of scheme 1 : The diagram shows only front rows; purl rows are knitted according to the fabric pattern. Where the diagram shows two knit stitches knitted together, you need to knit them with an inclination to the right (insert the knitting needle into the 2nd and 1st loops, starting from the second). Please note that the relief of the central braid is achieved not by interlacing loops, but by knitting two loops together and yarn overs.

Pattern 2

Description of the scheme 2 :This pattern combines two patterns: a simple braid of 6 loops and an openwork spike. The diagram shows the front and back rows. All loops indicated in the diagram, like two knit loops knitted together, must be knitted with a tilt to the right (insert the knitting needle into the 2nd and 1st loops starting from the second)

Pattern 3

Description of circuit 3: The pattern is based on alternating a simple braid of 4 loops and openwork arrows. This pattern is similar to the first pattern in the collection, only its central part is a little smaller and more delicate. Repeat the pattern in height from the 1st to the 6th rows.

Pattern 4

Description of circuit 4: Knit the openwork leaves of the pattern according to the proposed pattern. The diagram shows only the front rows; knit the purl rows according to the fabric pattern. The loops indicated in the diagram, as two knit stitches knitted together, must be knitted with an inclination to the right (insert the knitting needle into the 2nd and 1st loops, starting from the second).

A thin openwork braid of 3 knit stitches is knitted as follows: every 4 rows, the third loop is removed onto the previous 2 knit stitches. After which 1 knit stitch is knitted, 1 yarn over, 1 knit stitch.

Pattern 5

Description of circuit 5: This pattern also combines 2 patterns: a simple braid of 6 loops and openwork leaves. The tilt of the leaves can be done to the right and left, or combined, as shown in the example. The diagram shows only the front rows; in the purl rows, knit the loops according to the pattern, and purl the yarn overs.

Pattern 6

Description of circuit 6:
Pattern 6, like the following pattern, does not contain loops in its weaving pattern. The relief is achieved by shifting 2 loops and yarn overs knitted together. Watch the inclination of the 2 knit stitches knitted together (Insert the knitting needle into the 2nd and 1st loops, starting from the second). Repeat the pattern from the 1st to the 20th rows. In purl rows, knit stitches according to the pattern, yarn overs - purl.

Pattern 7

Description of circuit 7: The relief of the pattern is obtained through simple broaches and yarn overs. Pattern report 7 loops and 10 rows in height.

Pattern 8

Description of circuit 8: The number of loops is a multiple of 22 loops +2 edge loops. The diagram shows only the front rows; in the purl rows, knit all the loops according to the pattern, knit the yarn overs purl. Weaving the braid: leave 5 loops on the auxiliary knitting needle while working, knit the next 4 knit stitches, then knit the loops from the auxiliary knitting needle.

Pattern 9

pattern 9 “braid on mesh”

Scheme 9 “braid on mesh”

Description of circuit 9
The pattern is based on a simple braid of 12 loops placed on a background of openwork mesh. The pattern of this pattern is 16 stitches and 20 rows high. The diagram shows only the front rows, in the purl rows - all the loops are purl.

Pattern 10

pattern 10 “braid with openwork”

scheme 10 “braid with openwork”

Description of circuit 10
The pattern is based on a simple braid of 6 loops and openwork arrows. Pattern report 27 loops + 1 for symmetry. The diagram shows only the front rows in the purl rows of loops to knit according to the pattern. Repeat the pattern from the 1st to the 10th rows.

Pattern 11

pattern 11 “mesh braids”

Scheme 11 “mesh braids”

Description of circuit 11

Pattern report 12 loops + 8 loops for symmetry. Repeat the pattern from the 1st to the 12th rows.

Pattern 12

pattern 12 “openwork paths”

diagram-12 “openwork paths”

Description of circuit 12

Pattern 13

pattern 13 “openwork fantasy”

scheme-13 “openwork fantasy”

Description of circuit 13
The height of the “openwork fantasy” pattern is 56 rows. The report of the openwork braid is 10 loops, including 2 purl loops, 1 on each side of the braid. You can easily change the pattern by adding the number of purl stitches between the braids. The diagram shows only the front rows; in the purl rows, knit loops according to the pattern, and purl the yarn overs.

Pattern 14

pattern 14 “fantasy openwork”

scheme 14 “fantasy openwork”

Description of circuit 14
Pattern report 22 loops + 4 loops for symmetry (highlighted in color in the diagram). Repeat the pattern in height from rows 1 to 24.

Pattern 15

pattern 15 “braids with openwork”

Scheme 15 “braids with openwork”

Description of circuit 15
The pattern report is 26 loops and 52 rows in height (highlighted in the diagram). In purl rows, knit stitches according to the pattern.

ALL DIAGRAMS ENLARGE, just click on them with the mouse.

Stay tuned for updates on the website, 5 more patterns with openwork braids are coming soon.

Openwork patterns have long been considered an interesting and original way to decorate handicrafts. For beginning craftswomen, this type of jewelry may not seem very simple, but it is quite beautiful and unique. The basis for openwork patterns is most often knitting a regular braid. Those who have recently taken up such a hobby are recommended to first understand the patterns of knitting simple braids. There are, of course, alternative methods of knitting this type of product - openwork techniques such as yarn overs and combining some loops.

The advantage of this technique is the ability to use it for any type of clothing - dresses, sweaters, sweaters, vests or openwork hats. In addition, you can use various techniques for knitting openwork patterns. The openwork inserts on the sleeves look very beautiful and harmonious., collars and various combinations, combinations of some openwork patterns. Warm items look great with openwork braids on the sides of the item - this adds sophistication.

The vertical stripe is the front one.
The horizontal stripe is the wrong side.
Circle or symbol U - yarn over.
Arrow up - remove one stitch (loop), knit two knit stitches together and pull through the removed stitch.
Down arrow - remove one stitch, knit one stitch and pull through the removed stitch.

Descriptions and patterns of knitting an openwork braid

A hat and scarf, mittens and snood, a sweater and jacket - all these products can be decorated with this simple but cute braid. To be sure, just look at the photo. So, to decorate your product with such a braid, we knit according to the master class.

Knitting needles No. 2–4.
Thick and soft yarn.

Scheme No. 1

First of all, 23 loops are cast on. The first row is knitted with four knit stitches, two purl stitches, and one pull through two knit stitches. It is advisable to knit with a slant to the right (to do this, you need to insert the knitting needle into the second and first loops). After this, two purl stitches are made and again four knit stitches are made. One yarn over is made, another yarn over is made through the knit stitches, and another yarn over is made.

After this, the pattern is repeated up to twenty-three stitches. It is worth remembering that the pattern is given relief by knitting several loops and yarn overs. The second row is made approximately according to the same description, except that instead of the usual middle yarn over, two loops are knitted and one yarn over is added. With each new row, you need to add two purl stitches in the center. This pattern works until the sixth row, after which the pattern is repeated according to the same principle as described earlier.

Scheme No. 2

This description includes a combination of several techniques for knitting openwork loops and represents a more serious work than it was before. For this type of pattern, you need to cast on 24 loops, consisting of two knit stitches, two knitted together, eight purl stitches, two more knit stitches, six purl stitches, two knit stitches, two knitted stitches again and eight purl stitches again.

The second row is made according to the same principle, only the purl and knit loops are swapped - first, two purl loops are made, two are knitted together, and then eight knit loops, etc. The third row is identical to the first, only between the fifth and sixth, sixteenth and seventeenth loops Yarn over is added. The fourth one does the same as the second one, adding only the fourth and fifth, fifteenth and sixteenth yarn overs. Then the scheme is repeated.

Scheme No. 3

This pattern is based on alternating a simple braid of four loops and openwork arrows. This technique looks similar to the first pattern, but has smaller and more delicate sections. You can start repeating the pattern from the third row. For the first row, 12 stitches are cast on, of which the first three are knit, seven are purl, another three are knit and four are purl. In the second, you need to add two yarn overs at the beginning and at the end, and in the center you should knit two loops.

Scheme No. 4

Sometimes you can add so-called leaves to an openwork pattern - small rounded figures, shaped like leaves. They are done quite simply and do not require any specific or additional skills. It is worth noting that the diagram shows only front rows, purl rows are made using the same method. You should try to make loops knitted together with a bias.

For the first row, take 11 stitches: purl one, knit five, yarn over, knit four, knit, purl. The second row is knitted approximately according to the same principle, only after the fourth loop you need to make a yarn over, a knit stitch, another yarn over, two knit stitches, a knit stitch and a purl stitch. You need to remember that for this pattern you need to remove the third stitch after every fourth row.

Scheme No. 5

This circuit is also constructed as a combination of two ready-made patterns and is based on the technique of making a regular braid and openwork leaves. By throwing stitches onto the knitting needles, you can achieve a slight tilt - in this case, the side of the tilt is not considered important and allows needlewomen to experiment with the design. The pattern presented below will be written only on the front side; for the back side you need to use a similar technique for the pattern.

For the first row you need to knit one purl stitch, add three more knit stitches, two yarn overs, ten knit stitches, two purl stitches, ten knit stitches, two yarn overs, four knit stitches and one purl stitch. For the second row you can use a similar pattern, only Now the knitting comes after the third loop and all the yarn overs are shifted to the right.

In the third row you need to use the offset again, making the knitting after the fourth stitch. The next row can be done without yarn overs and knittings, adding regular knit and purl loops. After this you can repeat the pattern.

Knitting braids from openwork is not particularly difficult if you understand the process with intelligence and patience. In fact, there are many different patterns and descriptions that are suitable even for novice craftswomen who decided to try to decorate their product with a similar technique. The only difficulty in parsing schematic images and knitting instructions may be terminology, unclear symbols and abbreviations that are not known to everyone.

Another advantage of openwork braids is the opportunity to experiment with decorations and decorations for clothing. When knitting, experienced needlewomen often use various additions such as buttons, beads or ribbons.