Crochet mittens for little ones. Children's mittens “Kittens” (crochet)

It’s already autumn, which means it’s time to check the readiness of warm hats, scarves, socks and mittens. To crochet mittens, you just need to know how to crochet a single crochet. Such mittens will not stretch or deform, and the knitting will be tight. We will look at a very simple method of crocheting mittens and the main thing is that you can control their size according to your hand as you knit.

Knitting technique

You don’t need to draw up a pattern in advance; you can try on it as you go, and it’s even better to have a previously knitted item that fits your hand well.

Progress.

Step 1. Knitting an elastic band:

cast on a chain of loops along the height of the elastic band (a),
in each loop we knit a single crochet (b),
in the next row we thread the hook into the back wall of the loop, pull out the thread (c),
we knit it with a loop on the hook using a single crochet (d).
Then we knit all the rows in the same way. The length of the resulting canvas should be equal to the circumference of the wrist.

Step 2. Decorating the elastic:

fold the elastic band in half lengthwise, knit the outer loops (a) with a single crochet stitch,
pull the thread from the back wall of the loop of the near half of the fabric (b) and from the front wall of the back half (c),
from the loops on the hook we knit a single crochet (d),
we knit the whole row like this,
turn the resulting pipe inside out so that the connecting seam is not visible.

Step 3. Knitting a circular mitten fabric:

Along the edge of the elastic, we collect loops in an amount depending on the width of the brush. This is one and a half times, if the brush is not wide, like, for example, the mittens in the photo,
We begin to knit the fabric behind the back wall of the loops until we reach the position of the thumb,
we collect air loops to create a hole for the thumb of the mitten. For example, there are 7 of them, but it all depends on the shape of the brush,
skip 6 loops, insert the hook into the seventh loop and make a single crochet,

We continue to knit the mitten fabric in a circle. We make single crochets over the knitted chain loops.

Step 4. Closing the loops of the mitten:

We begin decreasing the loops approximately when the fabric covers the little finger (the peculiarities of the shape of the hand should also be taken into account),
pull the thread out of the working loop, do not knit it, pull the thread out of another loop (a),
knit all the loops on the hook with a single crochet (b),
knit 3 single crochets in each of the subsequent loops (c),
we knit the entire row according to this pattern,
in the next row we do this procedure after 2 loops, in the third row after one,
in subsequent rows we decrease in each loop until one remains (c),
We bring the tip of the thread to the wrong side and fasten it through the protruding loops.

Step 5. Knitting the finger of the mitten:

secure the thread with a knot,

Along the edge of the hole we cast on loops using double the number of air loops (in the example this is 14),

We knit the same way as we knitted the mittens,
To close the loops, we decrease with each loop, i.e. pull the thread onto the hook, then another thread, and knit all 3 loops together.

The mitten is ready.

You can also knit it with multi-colored threads, decorate it with rhinestones, beads, a knitted flower, etc. taste.

Warm, cozy mittens are an indispensable accessory for a frosty winter. They feel comfortable on your hands, and they look very cute. Mittens can be knitted; knitting requires several knitting needles and good knitting skills. It is much easier to learn how to crochet mittens. Firstly, they knit much faster than on knitting needles - the work takes only a few hours. Secondly, mittens crocheted from soft, delicate yarn “sit” better on the hand, clearly repeating the shape of the palm and thumb, and they can be tried on when knitting directly on the hand. We offer you a master class on crocheting beautiful and cozy mittens that will warm your hands during the cold season.

How to crochet mittens: knitting an elastic band

Knitting mittens begins with knitting an elastic band.

Cast on a chain of air loops, the number of loops is the desired height of the elastic band of the product. (Fig. a)
We knit a single crochet into each loop of the chain. (see fig. b)
On the next row, insert your hook into the back loop, pulling the yarn through. (Fig.c)
Knit this loop together with the loop on the hook with a single crochet. (Fig.d)
Continue knitting the fabric in the same way until the length is equal to the circumference of your wrist.

How to crochet mittens - forming an elastic band

After you have knitted the fabric to the required length, you need to fold it in half along the length of the product and knit a row of outer loops with a single crochet. (Figure a)
Pull the thread from the back wall of the loop of the half of the elastic band closest to you (Fig.b) and repeat the same manipulation with the front wall of the loop of the far half of the product. (Fig. c)
Next, along the course of the product, knit a single crochet (Fig. d), continuing to knit the entire row.
When finished, turn the knitted “tube” inside out to hide the resulting back seam on the elastic.

How to crochet mittens - knitting a circular fabric

We move on to knitting a circular mitten fabric; the number of additional loops cast on for work will depend on the width of your palm. Approximately, the number of loops will increase by 1.5 times.

Along the edge of the elastic band of the mitten, we collect additional loops and knit the fabric with a single crochet, hooking the loops behind the back wall. Try the mitten on your hand and mark the place where your thumb is located. It is necessary to tie it to its base.
Cast on air loops from which we will knit the thumb. The number of stitches cast on depends on the shape of your hand and thumb. This material class uses 7 air loops.

Skip 6 loops, insert the hook into the seventh loop and work a single crochet. Leave the finger loops for a while and continue knitting the mitten fabric in the round with a single crochet.

How to crochet mittens - closing the loops

We knit the fabric of the mitten in a circle until the length of the product covers the little finger; periodically try on the mitten on your hand. At this point we begin to gradually reduce the product, gradually decreasing the loops.
Pull the thread from the last working loop and do not knit it, pull the thread from another loop (Fig. a)
Knit together all the loops that are on the hook with one single crochet (Fig. b)
Next, knit 3 single crochets into each next loop. (Fig. c)
We continue to knit the entire row according to the pattern. In each subsequent row, we reduce the number of closed loops: the second row is knitted through 2 loops, in the third – one. Rice in
In the remaining rows, the decrease must be done in each loop. As a result, we will have one loop left (Fig. d). The end of the thread should be brought to the inside of the mitten and secure it.

How to crochet mittens - thumb knitting

Attach a new thread to the product using a knot.

Cast on loops along the length of the hole, double the number of loops, in this example it is 14 chain loops.

Knit the thumb fabric in the round using a single crochet stitch.
To bind off the loops, decrease the number of loops by pulling the thread onto the hook in each loop of the row and knitting three loops together.
One mitten is ready! We knit another mitten in the same way, changing only the place for knitting the thumb on the opposite side.

You can show your imagination and knit multi-colored mittens using several colors of yarn, decorate the knitted mittens with embroidery, applique of knitted flowers or beads.

Wearing things knitted with your own hands, in which love, good mood and positive emotions are invested, is always pleasant. It’s especially nice to receive knitted items as a gift; beautiful and warm crocheted mittens are a great gift idea for loved ones, to whom you can give a piece of your warmth.

We have already knitted, now let's take care of the mittens. It's no secret that all children adore soft toys in the shape of animals. Many of them even like to fall asleep with them. Therefore, most children prefer clothes that contain images of funny animals.

Today we invite you to crochet these original mitten bears with your own hands that any child will be happy to wear.

Measurements before knitting:

First of all, using a centimeter, measure the circumference of the child’s wrist, as well as the length of his hand. In addition, measure the length from the tip of your longest finger (usually your middle finger) to the base of your thumb. According to the sizes, we will knit mittens. In this case, they are connected for a child of two years.

To work you will need the following tools and materials:

light brown Malva threads,
hook number 1,
white and dark brown iris threads,
as well as toy eyes (2 pcs).

Step-by-step description of crocheting children's mittens:

We start knitting mittens from the top. To do this, we cast on 5 air loops,

We close the chain into a ring and knit 1 air loop to lift to the next row.

We knit the second row with single crochets, while inserting the tool into the hole of the ring, and not into the loops of the previous row.

Next, we knit single crochets in a spiral, adding 3 loops in each row so that the knitting does not curl prematurely. There should be 5 such rows.

Now we knit single crochets again, but this time decreasing the loops (1 loop per row). So we knit 7 rows.

After this, we stop decreasing and adding loops and knitting single crochets as usual. We knit 5 rows. It should look like this.

Then we make a hole for the thumb. To do this, we cast on 7 air loops and attach the chain with a single crochet to the sixth loop from the hook.

Next we knit, as usual, in a circle until the hole. As soon as you knit the loops “butt” to the arched hole, we make 1 air loop and attach it to the chain.

We turn the knitting over and then knit single crochets again until the hole. We knit single crochets on a chain.

Next, we again knit 4 rows of single crochets without changes, and starting from the 5th row, we will again decrease the loops - 2 pieces per row.

Now we will knit a row for the elastic according to the following pattern: 3 chain loops, (again 1 chain crochet for the pattern, 1 double crochet in the next loop, 1 chain loop, 1 double crochet). Repeat the pattern in brackets until the end of the row.

After this, we knit 3 rows of single crochets.

Next, we will knit the thumb of the mitten: attach the thread to the corner of the hole and knit single crochets in a circle to the base of the nail.

Now we begin to decrease loops (2-3 per row) until 2 loops remain. We pull the thread through the remaining loops, cut it off and carefully hide the tip inside the finger.

Next we will make the face of the bear. We knit the ears like this: we cast on 4 air loops, close them in a ring, and then we knit single crochets in a circle.

We knit 2 of these ears.

We knit the muzzle like this: we cast on 8 air loops, and then we tie single crochets in a circle, adding 3 loops at the ends of the oval.

We knit the nose in the same way as the ears, but smaller in size.

Sew all the details to the back of the mittens.

At the end of the work, we thread the elastic band into the corresponding row and secure it with threads.

Children's mittens “bears” crocheted are ready. Wear it with pleasure!

Warm crochet mittens very simple, following the description in this article. The mittens will be given a bright personality by decorating them with a crocheted cord made of lush columns, which can be sewn with any pattern on the surface.

To knit mittens you will need about 50 grams of wool yarn of the main color, and for decoration you can use the remains of threads of a suitable color, hook No. 3.5 or No. 4.

The main part of the mitten consists of two parts: an outer one and an inner one with a hole for the thumb.

External part knit according to the pattern. Cast on a chain of 30 chain stitches. + 3 air.p. lifting and tie it st. s/n, in rows back and forth, making additions at the end to round the part.

Having completed 4 rows, the width of the part should be equal to the width of the brush; if not, then knit 1 or 2 more rows of double stitch.

The inside of the mitten start knitting the same way as the outer one. Having made 1 row of stitches, in the second row tie the stitches to the thumb, make 3 chain stitches. rise and knit the 3rd row back.

Having knitted the 4th row of stitches to the thumb, cast on a chain of 7 chain stitches. and continue knitting st. s/n along the 1st row, retreating one loop for the hole.

Having knitted the 2nd and 3rd row along the left part back, finish the connection. Art. in the 3rd loop of the chain from the edge. Along the chain, knit 2 more stitches up and knit the 4th row of stitches back.

Also tie the inner part with the knitted hole with 1 or 2 rows of st. b/n.

Now it is necessary connect two main parts, tying them around the edge with a “crawfish step” or simple connecting posts. To do this, fold both parts together so that the hole for the finger is on the desired side, and knit stitches by inserting the hook behind the half-loops of the two parts. For tying, use yarn in a contrasting color.

Knit the mitten cuff in a circle, attach the thread to the edge: 1st row dc, 2nd row dc, from the third row knit an elastic band alternating a convex and concave embossed stitch. At the beginning of knitting each row, do a chain stitch. to the required height and finish the row of connecting sts in the last lifting loop.

Thumb mitten knit in rows st. s/n. Attach the thread to the edge of the hole, make 3 chain stitches. lifting, tie the hole st. s/n and finish the row of connections. Art. into the last loop of the climb. At the top of the finger, begin to taper the knitting by knitting two stitches together. Having tied your finger to the required height in the last row, make a row of sts. b/n, knitting all the loops in two stitches together. Sew the remaining hole with the remaining piece of thread.

A knitted mitten can be decorated knitted with a flower, beads, embroidery or decorative cord.

Knitting a lace from lush columns:

To knit the first fluffy stitch from the initial loop, pull out a long loop, yarn over, *insert the hook into the initial loop and, grabbing the working thread, pull out a new long loop*, repeat from* to* 3 more times. Knit the resulting lush bunch of long loops together in st. b/n.

The best protection for your hands in the cold winter is mittens. A properly knitted product will not only provide warmth, but will also be an excellent addition to your wardrobe. How to crochet mittens? What are the features of knitting mittens intended for an adult, a child, a newborn? Answers to these and a number of other questions in the master classes offered below.

The best protection for hands in the cold winter is mittens.

A crochet hook in skillful hands can create a truly original work and distinguish you from other people who have ordinary-looking mittens. The crochet pattern is not very complicated, however, it requires care and patience.

You will need:

Hook;
Yarn in 2 colors (for example, blue and white).

Step-by-step instruction:

Make 1 loop of blue yarn, knit 11 stitches around it (hereinafter referred to as stitches).
Close the circle st. made from white yarn.
Using white yarn, make 2 chain stitches (hereinafter referred to as vp), followed by a raised knit stitch. double crochet
In the next loop, knit 1 regular stitch. with a double crochet, after – 1 embossed stitch. double crochet Knit 24 stitches, taking into account the double lifting loop.
From the last lifting v.p. Do not remove the hook, close with blue yarn.
The third row begins, tie 2 vp in it. It is knitted exactly like the second one. Here you will get 48 stitches, taking into account the 2 initial ch.
Complete the third row with white yarn.
The 4th is an elastic band. Alternate the relief facial stitch in it. and Art. with a cape.
Complete this row with blue yarn.
Knit the remaining rows up to the thumb as the 4th. Do not add or subtract columns.
If you have reached the level of the thumb, work 2 ch, 1 knit stitch. double crochet In the next loop, knit a st. without a crochet.
Tie 13 ch.
Skip the 13th stitch, start knitting a relief single crochet with the 14th stitch. Until the row ends, alternate the relief st.
Close the row with a connecting st. You have knitted the thumb hole.
Return to the 4th row pattern and complete the knitting of the mittens according to it.
Knit the final row using the “crawfish step” technique.

Having knitted the right mitten, proceed to the left pair.

How to crochet mittens: lesson for beginners (video)

Knitting a thumb on a mitten

So, there are two mittens in front of you, and both have only one hole instead of a thumb. So it's time to tie your thumbs.

Thumbs are easy to tie

Step-by-step instruction:

Around the hole prepared for the thumb, knit single crochets.
Towards the end of the finger, cut 3 stitches in the final rows.
Pull the yarn tight by inserting it through the remaining loops.

How to crochet baby mittens: step-by-step instructions for beginners

Crocheted mittens will protect your baby's hands from strong winds and severe frosts. Before starting work, be sure to take measurements of the circumference and length of the child’s wrist (for example, with regular braid). It is better to take acrylic yarn as a material, since the mittens will have to be washed often, and acrylic products are resistant to washing and do not change shape. Below is a knitting pattern for mittens, starting with an elastic band, for a 5-6 year old child.

You will need:

Acrylic yarn in 2 colors (for example, purple and white);
Hook;
Threads;
Scissors.

Crocheted mittens will protect your baby's hands from strong winds and severe frosts.

Step-by-step instruction:

Make 10 chain stitches (hereinafter referred to as ch.) with purple yarn, 2 rising ch. Knit the resulting 12 double crochet stitches.
Unfold the knitting.
Knit 10 double crochet stitches, catching the front half-loops.
Knit 2 ch.
Unfold the knitting.
Knit 10 stitches, picking up the back half stitches.
Knit the elastic cuff according to this pattern, not forgetting to alternate rows of grabs for the front and back half-loops.
Knit the number of rows required for the elastic band.
Fold the cuff with the wrong side out, connecting the edges of the future mitten.
Tie the edges of the elastic using the “crawfish step” method, cut the threads, fasten, and hide the ends.
Take white yarn and tie the edge of the elastic with single crochets in 4 rows.
In the fifth row, leave a hole for your thumb. To do this, make 1 ch in place of the thumb. to rise, unfold the product, continue knitting in the opposite direction to the place of the finger.
Knit 4 chain stitches, fasten the finger holes on the opposite side, secure the thread, cut it.
Continue knitting the mitten with purple acrylic from the middle of the palm.
Knit 6 rows.
Knit 6 rows with white yarn.
We switch to purple acrylic, this is the color that will complete the product.
Knit 1 row.
In the following rows the mitten will gradually shorten. Decrease 1 tbsp. at the beginning and end of each row at the fold of the product.
Fasten the thread, cut it, turn the rest of the yarn to the wrong side.
Knit your thumb (discussed above).

Crochet scratches for newborns: instructions

Mittens are needed even for babies - they are usually knitted easily and quickly - without thumbs, so that the baby is not tempted to chew or suck on them.

A newborn baby may scratch his face even if his nails are trimmed short. This is due to the fact that the baby does not yet know how to control his hands and constantly pulls them towards his face. Therefore, young parents often find a simple way out - they put special scratch gloves on their hands. Is it possible to knit scratches yourself for a child under one year old? Certainly. The master class below will help with this.

You will need:

Yarn in 2 colors (for example, pink and white).
Hook.

Scratchies are very easy to knit

Step-by-step instruction:

Make 5 chain loops (hereinafter referred to as ch.) with white yarn.
Connect the ends into a ring with a column (hereinafter st.).
Knit st. without crochet in a spiral. Make additions in the rows, which will ensure a flat shape at the top of the product.
Start shortening the loops when the ends of the knitted circle, folded in half and applied to the baby’s palm, begin to extend beyond the level of the little finger and index finger. Decrease stitches at the beginning and end of each row.
Knit 1 row in decreasing direction.
Knit 1 tbsp. Single crochet in a spiral to the level of the thumb.
Start knitting decreasing rows. It is better to alternate like this: a row with a decrease, a row without a decrease.
Knit an elastic band at the bottom of the product, this is necessary for a stable fixation on the handle. Attach pink yarn to the base of the scratches. Knit 1 tbsp. double crochet Yarn over the hook. Insert the hook under the eyelet. Grab and knit 2 loops. Make 2 tbsp. double crochet Insert the hook under the loop from the wrong side of the product. Grab, pull the thread, knit a loop. Alternate purl 1 st. and 3 volumetric facial stitches. Knit a couple of rows.

Crochet decorations for scratchy mittens

Scratch mittens can be decorated with a wide variety of knitted figures; their choice depends only on your imagination and skill.

For example, for a boy, a knitted machine would be an excellent solution for mittens.

Step-by-step instruction:

Improvised fish can also be a decoration: you just need to tie the parts on them and attach them to scratches
Cast on 14 air loops (hereinafter referred to as ch), make 1 lifting loop.
Work a single crochet row.
Unfold the product and knit 4 rows.
Turn the machine around again and knit 4 rows.
Cast on 5 single crochet stitches, 6 ch, 2 tbsp. double crochet, secure on the 8th stitch of the row.
Cast on 4 vp, 1 st. with a double crochet, secure in the last loop.
Tie the car around the st. without a crochet.

Sew the machine to the scratches.
Attach buttons to the machine as wheels.

For girls, you can choose strawberries, flowers, cherries - you can easily find them on the Internet.

Original scratches can be knitted step by step not only with crochet, but also with knitting needles. And this is not at all difficult, since mittens for a small child have two big advantages - their small size and the absence of a hole for the thumb on the product.

You will need:

Knitting needles;
Yarn (for example, light green).

Step-by-step instruction:

Cast on 40 stitches, distribute them onto 4 knitting needles.
Knit an elastic cuff about 5-7 centimeters.
Create a hole for the lace to better secure the mittens on the baby's hands. You will get a hole if you do this: after knitting 2 knit stitches, make a yarn over.
Knit the rest of the piece with knit stitches.
When completing the mitten, decrease the loops. This is done like this: 2 loops are connected and knitted together.

Leave 8 end loops, pull them off the knitting needle, thread the thread through them, and tighten. Hide the end of the thread on the underside of the scratch mittens.